《Table 1.Process parameters of pure Ni and laminar SACNT/Ni composites》

  提示：宽带有限、当前游客访问压缩模式

本系列图表出处文件名：随高清版一同展现

《Preparation of super-aligned carbon nanotube-reinforced nickel-matrix laminar composites with excellent mechanical properties》

1. 获取 高清版本忘记账户？点击这里登录

1. 下载图表忘记账户？点击这里登录

The SACNT films were extracted from MWCNT arrays on a Si wafer.The thickness of the SACNT films was tens of nanometers，and the CNTs were joined end-to-end by the interaction of the van der Waals force.The electrodeposition was performed in an electrolyte of NiSO4·6H2O（260 g/L），Ni Cl2·6H2O（45 g/L），and H3BO3（15 g/L）using a DC power source.A pure Ni plate and a thin titanium plate（180 mm×55 mm×2 mm）were used as the anode and the cathode，respectively.Before the electrodeposition，the electrolyte was stirred for 30 min.The volume fraction of SACNTs depends on the current density（3 A/dm2）and the deposition time of Ni per layer（4，5.33，8，and 16 min），as specifically shown in Table 1.During the deposition，the pH value of the electrolyte was maintained at approximately 5–6 at room temperature.