《Table 1 Mechanical properties of pure PLLA and PLLA/BMCD blended polymer materials》
本系列图表出处文件名:随高清版一同展现
《Toughening of Poly (L-lactide) with Branched Multiblock Poly (ε-caprolactone)/poly (D-lactide) Copolymers》
Pure PLLA materials are brittle and exhibit limited extendibility.BM CDblended PLLAhave substantially improved mechanical properties.The stress-strain curves of pure PLLA and the blends w ere presented in Fig.4 and the mechanical properties of the materials w ere summarized in Table 1.From Fig.4,the elongation at break of the PLLA/BM CD blends increased as the BM CD contents increased,w hile the strength decreased.From Table 1,the elongation at break of the blend w as 9.60%w hen 3%(mass fraction)BM CD w as added,w hich w as slightly higher than the pure PLLA(3.93%).The elongation at break of the blend with 5%(mass fraction)of BM CD reached 50.97%and the tensile strength kept at a relatively high value of 50.50 M Pa.Further increase in the contents of BM CD to 7%,10%and 20%(mass fraction)enhanced elongation at break to 104.55%,200.62%and282.56%,respectively.The tensile strengths and Young's modulus of PLLA/BM CD blends decreased as the BM CD contents increased.The degree of the reduction w ere great.The dramatic reductions implied w eak interaction betw een PLLA and BM CD.For BM CD-20%,the tensile strength at break w as higher than the tensile strength at yield point,w hich probably ow ed to the formation of the stereocomplex in the blend.As the ratio of enantiomer increased,new hydrogen bonds w ere formed during the stretching,leading to a higher breaking strength at the post-yield region.
图表编号 | XD0014950700 严禁用于非法目的 |
---|---|
绘制时间 | 2018.10.31 |
作者 | 常悦、陈支泽、杨一奇 |
绘制单位 | College of Chemistry,Chemical Engineering and Biotechnology,Donghua University、College of Chemistry,Chemical Engineering and Biotechnology,Donghua University、Department of Textiles,Merchandising and Fashion Design,University of Nebraska-Lincoln、Department |
更多格式 | 高清、无水印(增值服务) |