《Table 5 Mechanical properties of cured pure EP and EP/PPAP composites》

《Table 5 Mechanical properties of cured pure EP and EP/PPAP composites》   提示：宽带有限、当前游客访问压缩模式
本系列图表出处文件名：随高清版一同展现
《Preparation of Poly(phosphoric acid piperazine) and Its Application as an Effective Flame Retardant for Epoxy Resin》


  1. 获取 高清版本忘记账户？点击这里登录
  1. 下载图表忘记账户？点击这里登录

The mechanical properties of pure EP and EP/PPAP thermosets with different contents of PPAP additive are presented in Table 5.The tensile and flexural strength values of pure EP thermosets are 57.2 and 102.3 MPa，respectively.The tensile and flexural strength values of cured EP/PPAP composites gradually decrease with increasing the content of PPAP in EP thermosets.The tensile and flexural strength for EP/5 wt%PPAP thermosets are 44.7 and 85.2 MPa，which are decreased by 21.9%and 16.7%，respectively.This phenomenon may be attributed to that the incorporation of PPAP flame retardant additive hinders the formation of crosslinking network of epoxy resin thermosets.On the other hand，the thermosets decompose to a certain degree due to the presence of a number of acid hydroxyl groups in PPAP.

图表编号XD0020169500    严禁用于非法目的
绘制时间2018.05.01
作者Miao-Jun Xu、Si-Yu Xia、Chuan Liu、Bin Li
绘制单位Heilongjiang Key Laboratory of Molecular Design and Preparation of Flame Retarded Materials, College of Science, Northeast Forestry University、Heilongjiang Key Laboratory of Molecular Design and Preparation of Flame Retarded Materials, College of Science,
更多格式高清、无水印（增值服务）

相关图表

  1. 《表2 ECAP前后纯铝试样的力学性能Tab.2 Mechanical properties of pure aluminum samples before and after ECAP》2019.02.10
  2. 《Table 2:Physical and mechanical properties of ZTA》2019.03.01
  3. 《Table 1 Mechanical properties of pure CE and the 10 wt%FG/CE composite.》2019.02.01
  4. 《Table 1 Physical properties of the pure and W-doped meso-porous TiO2》2019.02.01
  5. 《Table 2Mechanical and physical performance parameters of pure nickel Ni201》2019.01.25
  6. 《Table 2 Mechanical properties of XNBR and its composites》2019.01.15
  7. 《表2 1060纯铝的基本力学性能参数Tab.2 Basic mechanical properties of 1060 pure aluminum》2019.01.20
  8. 《表4 固化物的力学性能和邵氏D硬度Table 4 Mechanical properties and Shore D hardness of curing products》2018.06.25
  9. 《表2 环氧树脂和环氧树脂修饰碳纳米管复合材料的力学性能Table 2 Mechanical properties of EP and EP/CNT composite》2018.06.30
  10. 《表2 CE/EP/PR树脂的力学性能Table 2 Mechanical properties of CE/EP/PR》2018.08.01
  11. 《Table 3 Mechanical properties of SBR and SBRCNs》2018.07.15
  12. 《Table 2 Change rate of mechanical properties of KH 550 surface modified sepiolite/natural latex composite film after agi》2018.03.15
  13. 《Table 4 Effect of first curing conditions on mechanical properties of composites》2018.03.15
  14. 《Table 5 Effect of post curing conditions on mechanical properties of composites》2018.03.15
  15. 《Table 1 Physical and mechanical properties of silicone rubber》2018.03.15
  16. 《表5 德国非调质曲轴用钢成份和力学性能Table 5 Chemical composition and mechanical properties of German non quenched and tempered steel for》2018.08.25
  17. 《Table 2 Thermal properties of pure PLLA and PLLA/BMCD blended polymers w ith various ratio》2018.10.31
  18. 《Table 1 Mechanical properties of pure PLLA and PLLA/BMCD blended polymer materials》2018.10.31
  19. 《表2 固化条件对环氧胶改性丁苯橡胶可剥离涂层机械性能的影响Table 2 Effects of curing conditions on mechanical properties of epoxy glue-modified styren》2018.05.30
  20. 《表5 AESO–WPU和AESO–PUA胶膜的机械性能Table 5 Mechanical properties of AESO–WPU and AESO–PUA films》2018.01.30

随机翻阅

《表2 刚性海床下节点A疲劳损伤计算表》 《表1 监测点选取数量：深基坑地连墙变形规律监测分析》 《表1 多案例的范畴归类：组织即兴诱发机制:基于舞台创意过程的研究》 《表2 力学性能测试结果：下摆臂断裂失效分析》 《表2 抗风缆静风稳定性对比》 《表8 武警某医院66名医务人员不同时刻手卫生依从率》 《表3 三组患者住院情况比较（n=59, )》 《表1 两组患者治疗效果比较[例 (%) ]》 《表7 稳健性检验结果2》 《表5《健康空间和场所》设计导则内容概述》