《Table 4 Effect of first curing conditions on mechanical properties of composites》
提示:宽带有限、当前游客访问压缩模式
本系列图表出处文件名:随高清版一同展现
《玄武岩短纤维增强硅橡胶/氟橡胶复合材料的力学性能及热稳定性能》
The data on the left and right of separatrix“/”are the values before and after heat air aging respectively.
MVQ和FKM通常需要进行二段硫化(或称后硫化),目的是让一段硫化中未反应的交联基团继续完成反应,另一方面,通过二段硫化除去硫化剂交联完成后的残余物,使得硫化橡胶的耐热性能更好。从表5可以看出,最佳的二段硫化温度为200℃、时间为360 min。其原因与一段硫化相同。
图表编号 | XD0024518500 严禁用于非法目的 |
---|---|
绘制时间 | 2018.03.15 |
作者 | 武卫莉、王毅文 |
绘制单位 | 齐齐哈尔大学材料科学与工程学院、齐齐哈尔大学材料科学与工程学院 |
更多格式 | 高清、无水印(增值服务) |
查看“Table 4 Effect of first curing conditions on mechanical properties of composites”的人还看了
- 表2硫化剂用量对PP/IIR弹性体动态力学性能的影响Tab.2 Effect of curing agent on the dynamic mechanical properties of PP/IIR TPV
- 表4 共混物人工气候老化过程力学性能保持率的变化Table 4 Effect of accelerated weather aging time on mechanical property of the blends
- 表4 喷水条件对菌株Hf-01防除杂草的综合防效的影响Table 4 Effect of water spraying conditions on the total effect of weed control by strain Hf-