《Table 2.Relative texture coefficients and average grain sizes of the composites》
本系列图表出处文件名:随高清版一同展现
《Preparation of super-aligned carbon nanotube-reinforced nickel-matrix laminar composites with excellent mechanical properties》
As shown in Table 2,the(200)peaks are the most intense,indicating preferred growth parallel to the(200)plane for the pure Ni.When the SACNT content in the composites was increased,the(200)orientation intensities slightly decreased from 91%at the maximum in pure Ni to 52%in the composite containing 4vol%SACNTs.The intensities of the(111)and(220)planes show substantial enhancement.The(111)facet is known to have a higher atomic density and lower surface energy in the fcc lattice compared with other facets.However,Ni atoms apparently migrated from the higher-energy(200)plane to the lower energy(111)or(220)planes when the CNTs were present.The growth direction of the SACNT/Ni composites changes from the single(200)plane to a combination of the(111),(220) ,and(200)planes.
图表编号 | XD0028411000 严禁用于非法目的 |
---|---|
绘制时间 | 2019.01.01 |
作者 | Ze-cheng Hou、Lun-qiao Xiong、Yuan-feng Liu、Lin Zhu、Wen-zhen Li |
绘制单位 | School of Materials Science and Engineering, Tsinghua University、School of Materials Science and Engineering, Tsinghua University、School of Materials Science and Engineering, Tsinghua University、Tsinghua-Foxconn Nanotechnology Research Center, Tsinghua Un |
更多格式 | 高清、无水印(增值服务) |
查看“Table 2.Relative texture coefficients and average grain sizes of the composites”的人还看了
- 表2 不同固溶工艺下AZ80镁合金的平均晶粒尺寸、抗拉强度及伸长率Tab.2 Average grain size, tensile strength and elongation of AZ80 magnesium alloy under
- 表4 不同工艺参数下HAZ与PMZ晶粒尺寸平均统计值 (μm) Tab.4 The average statistical value of HAZ and PMZ grain size under different process pa