《Table 1.Composition of the interstitial-free steel》

《Table 1.Composition of the interstitial-free steel》   提示：宽带有限、当前游客访问压缩模式
本系列图表出处文件名：随高清版一同展现
《Comparison between the surface defects caused by Al_2O_3 and TiN inclusions in interstitial-free steel auto sheets》


  1. 获取 高清版本忘记账户？点击这里登录
  1. 下载图表忘记账户？点击这里登录
Note:Alssoluble aluminium in the steel；T.Ototal oxygen in the steel.

The following process was adopted to produce IF steel at a certain plant:bottom-blown converter→ladle slag modification treatment→250-t Ruhrstahl–Heraeus（RH）refining→continuous casting（1347 mm×240 mm）.The converter terminal carbon content is required to be controlled at0.02wt%–0.04wt%.Before the start of RH refining，the ladle slag was modified.About 20 min after the start of the decarburization in RH vacuum degassing，the carbon content reduced to 15×10–6.After decarburization，Al was used as a deoxidizer，and Ti was added to the liquid steel after deoxidization for 3 min.After RH refining，the steel ladle was left to stand for about 40 min before casting.The composition of the IF steel used in this study is given in Table 1.

图表编号XD0050011700    严禁用于非法目的
绘制时间2019.02.01
作者Rui Wang、Yan-ping Bao、Zhi-jie Yan、Da-zhao Li、Yan Kang
绘制单位School of Materials Science and Engineering, North University of China、State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing、School of Materials Science and Engineering, North University of China、School of Materials Sci
更多格式高清、无水印（增值服务）

相关图表

  1. 《Table 3.Partition coefficients and diffusion coefficient of solute in interstitial-free molten steel》2019.02.01
  2. 《Table 1 Composition of the HFD for the MS model mice》2019.02.28
  3. 《Table 1 Chemical composition of the investigated steel/wt》2019.02.01
  4. 《Table 1.Elemental composition of the mild steel samples》2019.01.01
  5. 《Table 1.Composition of the as-cast (AC) steels》2019.01.01
  6. 《Table 1.Chemical composition and transformation temperatures of the studied TRIP steels》2019.01.01
  7. 《Table 5.NMI content of the studied steels》2019.01.01
  8. 《Table 1 Composition and nutrient levels of the diets (dry matter basis)》2018.06.20
  9. 《Table 1 Composition and nutrient levels of the diets (dry matter basis)》2018.06.20
  10. 《Table 1 Composition of the casting solutions》2018.03.10
  11. 《Table 2Average and maximum dimple sizes of fractured surface of the experimental steels》2018.12.30
  12. 《Table 1 Chemical composition of the duplex stainless clad steel plate》2018.06.30
  13. 《Table 1 Chemical composition of the tested steel》2018.03.30
  14. 《Table 1 Compositions of the experimental steels》2018.03.30
  15. 《Table 2.Phase-transition temperatures of the tested steels》2018.08.01
  16. 《Table 1.Chemical compositions of the tested steels》2018.08.01
  17. 《Table 1.Chemical compositions and production processes of the investigated steels》2018.03.01
  18. 《Table 2.Macrohardness and microhardness of the tested steels》2018.03.01
  19. 《Table 1.Average steel composition and temperature at the end of the RH refinement process》2018.03.01
  20. 《Table 1–Composition of each emulsion used in the study.》2018.09.01

随机翻阅

《表2 施用不同用量油页岩废渣玉米穗长和穗粗》 《表1 疫情下，医院“三降两升”变化情况》 《表2 西洋参硫熏前后人参皂苷类成分和无机元素的含量变化(±s,n=5)》 《表4 6种野牡丹科植物的观赏性初步分析》 《表3 回归分析结果：高层管理团队异质性对企业绩效的影响——两职合一的调节作用》 《表1 两组患者各时间点MAP水平对比 (±s, mm Hg)》 《表8 颜料晶体形状、大小、结晶等和PE成型收缩关系》 《表4 对比计算模型的节点坐标 (x, y) 设置》 《表2 残差分析：8.5m超大采高综采面回采巷道合理煤柱宽度分析》 《表2 电极原始成分 (质量分数, %)》