《Table 2Average and maximum dimple sizes of fractured surface of the experimental steels》

《Table 2Average and maximum dimple sizes of fractured surface of the experimental steels》   提示：宽带有限、当前游客访问压缩模式
本系列图表出处文件名：随高清版一同展现
《"Effect of intercritical annealing on microstructure,mechanical properties,and work-hardening behavior of ultrahigh-strength dual-phase steels with different silicon contents"》


  1. 获取 高清版本忘记账户？点击这里登录
  1. 下载图表忘记账户？点击这里登录

Fig.7 shows SEM micrographs of the fracture surfaces of the experimental steels after tensile testing at room temperature.All samples exhibited ductile fractures characterized by a high density of microvoid dimples.Table 2 shows the mean and maximum fracture surface dimple sizes at 790℃for the three steels with varying Si concentrations，which are related to the nucleation sites and material properties.

图表编号XD004650900    严禁用于非法目的
绘制时间2018.12.30
作者LI Wei、John G SPEER、ZHU Xiaodong、LI Wei
绘制单位School of Materials Science and Engineering,University of Shanghai for Science and Technology、Research Institute,Baoshan Iron & Steel Co.,Ltd.、State Key Laboratory of Development and Application Technology of Automotive Steels(Baosteel)、Advanced Steel Pro
更多格式高清、无水印（增值服务）

相关图表

  1. 《Table 9 The slip coe fficie ntsμof friction surface for steel material in GB 50017—2017》2020.08.22
  2. 《表2 典型冰川平均冰面高程变化Table 2Average surface elevation changes of the three representative glaciers》2018.04.25
  3. 《Table 1–Comparison of the Brunauer–Emmett–Teller (BET) surface area, pore size and pore volume of the different samples.》2019.05.15
  4. 《Table 7 Calculated and experimental values of kand n with different size of tailings》2019.05.15
  5. 《Table 7 Calculated and experimental values of kand n with different size of tailings》2019.05.15
  6. 《Table 2 Specific surface area, average size, and oxygen evolution efficiency of the oxide electrodes》2019.02.01
  7. 《Table 1.The particle size distribution parameters, specific surface area and pH val-ues of NCA-P1 and NCA-C1.》2019.01.01
  8. 《表2 面齿轮齿面最大弯曲应力点Table 2 The maximum bending stress of tooth surface》2018.06.05
  9. 《Table 3.The Detected Maximum Velocity, Pressure, and Surface Temperature of the Fluid Field at Different Timesa》2018.04.10
  10. 《表2 不同PVA浓度的复合凝胶球比表面积及孔容孔径Table 2 The gel ball ratio surface area and pore size aperture of different PVA concentration》2018.04.01
  11. 《Table 1 Level and code of experimental factor in response surface》2018.07.30
  12. 《Table 2 Specific surface areas, pore volumes and pore sizes of samples》2018.02.10
  13. 《表2 模拟和试验的平均晶粒尺寸比较Table 2 Average grain size comparison of simulation and experimental data》2018.07.01
  14. 《表3 J积分与强度对比Table 3 Tensile and fracture properties of0Cr18Ni9 stainless steel》2018.02.01
  15. 《Table 5 Surface element content of new steel ball and worn surface tested by EDS》2018.09.30
  16. 《Table 1 The effect of oxidants on BET surface area, pore volumes and average pore sizes of samples (with microwave power》2018.03.30
  17. 《表2 各工况钢结构节点位移最大值和最大应力Table 2 Maximum displacement and maximum stress of steel structure joints under different working c》2018.06.30
  18. 《Table 1 Compositions of the experimental steels》2018.03.30
  19. 《Table 2.Specific surface area and pore size distribution of stone coal waste rocks at different leaching periods》2018.08.01
  20. 《表3 实验喷管构型尺寸Table 3 The configuration size of experimental nozzle》2018.02.01

随机翻阅

《表3 官寨井田地面煤层气抽采试验井压裂数据》 《表7 涂料开发过程涂膜色差数据》 《表4 茶水比对浸提液色泽、浸出物含量及感官评分的影响》 《表2 围产儿并发症发生率比较比较[例（%）]》 《表1 不同组数、电压等级避雷器的单组放电电流和GPR限值》 《表1 2017-2018年试验地土壤基础肥力》 《表3 试验重载列车作用下实测跨中最大横向加速度及行车速度》 《表1 正交试验因素水平表》 《表1 调查企业行业分布比例》 《表2 多发肾结石患者微创经皮肾镜取石术后血清氧化应激因子 ()》