《Table 1 XRD peak position before and after milling》
提示：宽带有限、当前游客访问压缩模式
本系列图表出处文件名：随高清版一同展现
《纳米晶Al-10Fe-5Cr块体合金的热稳定性（英文）》
TheXRDpatternsoftheas-mixedand mechanically alloyed powders（after 100 h of milling）are shown in Fig.2.The major peaks detected were observed with be associated to the diffraction peaks of Al.However，the major diffraction peaks of Fe（110）and Cr（110）were not observed in the XRD profiles probably due to their overlapping with Al（200）.Al peaks was observed to shift to a higher 2θangles in the milled powder when being compared to the as-mixed powder.The observed 2θpeak shift shown in Table 1 can be associated to the dissolution of the alloying elements Fe and Cr to form Al based supersaturated solid solution（SSSS）.In addition to the peak shift，a considerable decrease in the peak intensities along with broadening of the peaks was also observed in the XRD peak profile of the alloyed powder.These observations imply that the MA of the powders resulted in refining the structure and increasing the lattice strain.
| 图表编号 | XD0064470000 严禁用于非法目的 |
|---|---|
| 绘制时间 | 2019.02.01 |
| 作者 | Muneer BAIG、Hany R.AMMAR、Asiful H.SEIKH、Jabair A.MOHAMMED、Fahad AL-MUFADI、Abdulaziz ALABOODI |
| 绘制单位 | Engineering Management Department, College of Engineering, Prince Sultan University、Mechanical Engineering Department, College of Engineering, Qassim University、Metallurgical and Materials Engineering Department,Faculty of Petroleum and Mining Engineering |
| 更多格式 | 高清、无水印（增值服务） |
