《Table 4.EDS analysis results for point A in Fig.9》

《Table 4.EDS analysis results for point A in Fig.9》   提示：宽带有限、当前游客访问压缩模式
本系列图表出处文件名：随高清版一同展现
《Weldability and liquation cracking behavior of ZhS6U superalloy during electron-beam welding》


  1. 获取 高清版本忘记账户？点击这里登录
  1. 下载图表忘记账户？点击这里登录
at%

The results of the EDS analysis at point A in Fig.9（a）and the distribution of the Nb，Ti，and W elements are presented in Table 4 and Fig.9，respectively.These results clearly demonstrate that this crack forms because of the melting of an MC-type carbide that is rich in tungsten，titanium，and niobium（Fig.9）.These results demonstrate the destructive role of grain-boundary strengthening phases（e.g.，MC-rich carbides of tungsten and niobium）in the welding of Zh S6U superalloys.

图表编号XD0050013200    严禁用于非法目的
绘制时间2019.02.01
作者Arash Khakzadshahandashti、Mohammad Reza Rahimipour、Kourosh Shirvani、Mansour Razavi
绘制单位Department of Ceramic,Materials and Energy Research Center、Department of Ceramic,Materials and Energy Research Center、Department of Material and Renewal Energy, Iranian Research Organization for Science and Technology (IROST)、Department of Ceramic,Materia
更多格式高清、无水印（增值服务）

相关图表

  1. 《Table 5 EDX analysis results of Points A and B in Fig.9 (at.%)》2019.02.01
  2. 《Table 4 Multivariable analysis of risk factors for development of a major bleed in patients with hepatic cirrhosis》2019.04.27
  3. 《表4 图4 (a) 中1点和2点EDS检测结果Tab.4 EDS test results of 1 and 2 points in Fig.4 (a)》2019.02.10
  4. 《Table 3.EDS analysis results corresponding to points A and B in Fig.6 (c)》2019.02.01
  5. 《Table 2.EDS analysis results corresponding to point A in Fig.2》2019.02.01
  6. 《Table 1.Industrial analysis results for the reductant used in the experiments》2019.02.01
  7. 《Table 2:EDS analysis results of points in Fig.3》2019.01.01
  8. 《Table 2 Results of statistical analysis for the mean IMC thickness in the SAC305/Cu and SAC305/Ni-W-P/Cu samples》2019.02.01
  9. 《Table 6 Composition of the Yellow River-slag composite material sample at the position“A”in Fig.9》2019.02.01
  10. 《Table 2.Column summation of the connectivity matrix shown in Fig.9 for 2008–2010》2019.01.01
  11. 《Table 2 EDS results for the points indicated in Fig.4 (at%)》2019.01.01
  12. 《表7 鸡骨草总皂苷含量与施肥量的回归分析结果Table 7 Regression analysis for content of total saponins in A.cantoniensis and fertilizer amount》2018.08.01
  13. 《表4 漏点周围腐蚀产物EDS分析结果 (质量分数) Tab.4 EDS analysis results of corrosion products near leakage point (mass fraction)》2018.12.15
  14. 《表4 断口各区域腐蚀产物的EDS分析结果 (质量分数) Tab.4 EDS analysis results of corrosion products on different areas in the fracture (mass)》2018.08.15
  15. 《表4 图9中腐蚀产物的EDS分析结果 (质量分数) Tab.4 EDS analysis results for corrosion products in figure 9 (mass)》2018.06.15
  16. 《表2 图8中A、B和C点能谱分析结果Table 2 EDS results of A, B and C points in Fig.8》2018.09.01
  17. 《表4 图7中标记处的二次相EDS分析结果Table 4 EDS analysis of the second phase marked point 1~5in Fig.7 (ω/%)》2018.07.01
  18. 《Table 2 EDS analysis of homogenized alloy after 500oC for16 h of point 1 and 2 in Fig.8》2018.05.01
  19. 《Table 4 EDS point analysis of Ag-Cu-8Ti in Fig.4c (at%)》2018.04.01
  20. 《表4 涂层中各物相的EDS分析结果Table 4 EDS analysis results of each phase in the laser cladded layer》2018.07.10

随机翻阅

《表1 2020年11月宝鸡市3所中学青少年各变量得分（x±s)》 《表1 PHC桩设计参数：复杂地质条件下PHC桩可打性与实际沉桩全程动测对比分析》 《表3 永磁同步电机参数：基于模糊PI的永磁同步电机矢量控制》 《表6 罕山国家级自然保护区与有关地区的真菌区系比较》 《表3 文化自信问卷验证性因素分析的因素载荷》 《表3 Box-Behnken试验设计及结果表》 《表1 术后恢复情况 ()》 《表1 事故组(使用仪器:T24VA)》 《表2 两组孕妇产程时间比较 (±s)》 《表2 近五年中国“清廉指数”世界排名情况》