《Table 7 Effects of modification parameters on MC-N adsorption capacity》
提示:宽带有限、当前游客访问压缩模式
本系列图表出处文件名:随高清版一同展现
《Preparation and Modification of Micro-Mesoporous Carbon Materials for Toluene Adsorption》
A maximum adsorption capacity(514.7 mg/g)was obtained at 60°C,when MC-N was treated by nitric acid with a mass fraction of 20%for 12 h(Table 7).The acidity and oxidation properties of nitric acid were brought into full play at an appropriate temperature so that the micropore volume of MC-N increased while the mesopores volume was not influenced obviously(with the characterization data presented in Section 3.5).It can be seen from Figure7c that when the modification temperature was higher than 75°C,the adsorption rate became fast and the adsorption capacity dropped.
图表编号 | XD0011297000 严禁用于非法目的 |
---|---|
绘制时间 | 2018.03.30 |
作者 | Liu Fang、Xue Ming、Wang Hongxi、Chai Qingwen、Li Meng、Dai Yexin、Zhao Chaocheng、Wang Yongqiang |
绘制单位 | State Key Laboratory of Petroleum Pollution Control、College of Chemical Engineering, China University of Petroleum、State Key Laboratory of Petroleum Pollution Control、College of Chemical Engineering, China University of Petroleum、State Key Laboratory of P |
更多格式 | 高清、无水印(增值服务) |
查看“Table 7 Effects of modification parameters on MC-N adsorption capacity”的人还看了
- 表3 改性哈密钾长石吸附Pb2+的热力学参数Table 3 Thermodynamics parameters for adsorption of Pb2+on modified potassium feldspar in Hami
- Table 3–Parameters of pseudo-first-order and pseudo-second-order fits for As (V) adsorption on Zn0.6Fe2.4O4, α-Fe2O3, γ-