《Table 4.Corrosion parameter fitting results from the corrosion polarization curves》
本系列图表出处文件名:随高清版一同展现
《Wear and corrosion resistance of laser-cladded Fe-based composite coatings on AISI 4130 steel》
To further study the corrosion resistance of the specimens,potentiodynamic polarization tests were conducted and the results are shown in Fig.13.The anodic and cathodic Tafel slopesβa andβc,respectively,were acquired from the intersection of the anodic and cathodic Tafel curve tangents using the Tafel extrapolation method.The corrosion fitting parameters Ecorr,Jcorr,and Rp are extracted from the polarization curves and are listed in Table 4.It is known that the Ecorr values of the Fe-based cladding layers are more positive than those of the substrate under identical corrosion conditions,and the corrosion resistance(Rp)values of the cladded coatings are much higher than those of the substrate by about 19.37 times(No.1)and 5.04 times(No.2).
图表编号 | XD002873900 严禁用于非法目的 |
---|---|
绘制时间 | 2018.06.01 |
作者 | Li Fan、Hai-yan Chen、Yao-hua Dong、Li-hua Dong、Yan-sheng Yin |
绘制单位 | College of Ocean Science and Engineering, Shanghai Maritime University、Department of Marine Engineering, Nantong Shipping College、College of Ocean Science and Engineering, Shanghai Maritime University、College of Ocean Science and Engineering, Shanghai Mar |
更多格式 | 高清、无水印(增值服务) |
查看“Table 4.Corrosion parameter fitting results from the corrosion polarization curves”的人还看了
- 表1 极化曲线相关电化学参数拟合结果Tab.1 Fitting results of related electrochemical parameters of polarization curves