《Tab.5 Comparison of peak values in vertical acceleration time history curves》
Fig.14 shows the comparison of the vertical acceleration time-history curves between the tests and simulation results under several loading conditions.The corresponding comparison of peak values(absolute values)is shown in Tab.5.As can be seen from Fig.14,the test and simulation results only match well at peak points,and the overall trend is that the simulation values are lower than those from the tests.The proposed model fails to capture the acceleration responses under low excitations as a result of the great friction coefficient used in the simulations.However,it is worth noting that,as can be seen from Tab.5,the peak errors between the tests and the simulations are still less than15%.In combination with the observations in the above sections,it can be concluded that the proposed simplified model can be used to simulate the mechanical behavior of the superstructure isolated by FPBs.
图表编号 | XD0015632100 严禁用于非法目的 |
---|---|
绘制时间 | 2018.12.01 |
作者 | 王燕华、冯岩、吴京 |
绘制单位 | 东南大学混凝土及预应力混凝土结构教育部重点实验室、东南大学混凝土及预应力混凝土结构教育部重点实验室、东南大学混凝土及预应力混凝土结构教育部重点实验室 |
更多格式 | 高清、无水印(增值服务) |
查看“Tab.5 Comparison of peak values in vertical acceleration time history curves”的人还看了
- Table 3 Analysis of peak time and peak area percentage of 15 common metabolites in different aromatic rice varieties
- 表5 14批样品HPLC图谱共有峰的相对峰面积Tab 5 Relative peak area of common peaks in HPLC fingerprints of 14 batches of samples