《Table 5 Ti activity in the molten brazing alloy Ag-Cu-Ti》

  提示：宽带有限、当前游客访问压缩模式

本系列图表出处文件名：随高清版一同展现

《Ti活度对Al_2O_3/Ag-Cu-Ti/Fe-Ni-Co钎焊接头力学性能和微观组织结构的影响（英文）》

1. 获取 高清版本忘记账户？点击这里登录

1. 下载图表忘记账户？点击这里登录

The base materials are 95 wt%Al2O3 ceramic and Fe-33wt%Ni-15 wt%Co alloy plates.The size of Al2O3 ceramic and Fe-Ni-Co alloy is shown in Fig.1.Fe-Ni-Co alloy plates with a thickness of 1 mm were treated with the surface nickel-plating to ensure a favorable spreadability of the brazing alloy on it.Generally，thickness of nickel coating on the Fe-Ni-Co alloy sheet was only~6μm.The brazing alloy was a commercial Ag-Cu-Ti filler alloy（Lucas-Milhaupt，Inc）and the constituents of the Ag-Cu-Ti alloy is listed in Table 1.Their face for brazing were coated by Ag-Cu-Ti paste filler alloy using brushes and the thickness of the filler alloy was~50μm（shown as Fig.1）.