《Table 2 Parameters of Ti C synthesized via combining carbothermal reduction and molten salt method

  提示：宽带有限、当前游客访问压缩模式

本系列图表出处文件名：随高清版一同展现

《碳热还原结合熔盐法制备碳化钛粉末与表征（英文）》

1. 获取 高清版本忘记账户？点击这里登录

1. 下载图表忘记账户？点击这里登录

Fig.6 displays the particle size and distribution of Ti C powders tested using a Mastersizer 2000.As can be seen from the picture，particle size is mainly distributed in about 10μm.The mean volume diameter and the mean surface area diameter of synthesized Ti C powder particles measured by laser scattering method are 18.737 and 9.237μm，respectively as shown in Table 2.The data of the mean volume diameter are much lower than those of the diameter of the surface area.This is caused by particle agglomeration，which takes place because of the contact between reactants or the sintering promoted by reaction medium of Na Cl.In this way，the conglomeration of the particles could explain the decreased mean surface area diameter of sample particles and thus partially compensate for the SEM measurement error in particle size.