《Table 2 EDX results of FRPs in as-cast M1 alloy with SC (at.%)》
本系列图表出处文件名:随高清版一同展现
《高压和锰添加对流变挤压成形过共晶Al-Si合金富铁相和力学性能的影响(英文)》
Figure 3 shows the microstructures of as-cast M1alloy with SC under 0,100,200 and 300 MPa.The microstructure of M1 alloy is mainly composed of primary Si,eutectic structure,coarse plate-shapedδ-Al4(Fe,Mn)Si2,long needle-shapedβ-Al5(Fe,Mn)S and bone-shapedα-Al15(Fe,Mn)3Si2 phases.The XRD spectra of as-cast M1 alloy with SC are shown in Fig.4Table 2 gives the EDX analysis results of the FRPs According to the phase diagram,during the equilibrium solidification of Al-14Si-2Fe alloy,the primaryδphase is precipitated firstly,then the previously formedδphase transforms intoβphase through peritectic reaction L+δ→β+Si,and finally the eutectic structure is obtained[19].When Mn is added into the hypereutectic Al-Si alloy with high iron content,α-Al15(Fe,Mn)3Si2phase will be formed through peritectic reaction[20].
图表编号 | XD0064470300 严禁用于非法目的 |
---|---|
绘制时间 | 2019.02.01 |
作者 | 林冲、吴树森、吕书林、吴和保、陈汉新 |
绘制单位 | 武汉工程大学化工装备强化与本质安全湖北省重点实验室、华中科技大学材料成形与模具技术国家重点实验室、华中科技大学材料成形与模具技术国家重点实验室、华中科技大学材料成形与模具技术国家重点实验室、武汉工程大学化工装备强化与本质安全湖北省重点实验室、武汉工程大学化工装备强化与本质安全湖北省重点实验室 |
更多格式 | 高清、无水印(增值服务) |