《Table 1:Design compositions of experimental alloys》

《Table 1:Design compositions of experimental alloys》   提示：宽带有限、当前游客访问压缩模式
本系列图表出处文件名：随高清版一同展现
《Effects of trace Cr on as-cast microstructure and microstructural evolution of semi-solid isothermal heat treatment ZC61 magnesium alloy》


  1. 获取 高清版本忘记账户？点击这里登录
  1. 下载图表忘记账户？点击这里登录

The composition of experimental alloys is shown in Table1.Alloys were prepared from high purity Mg，Zn and Cu ingots（99.9wt.%），and Cr particles（99.95wt.%）；all metals were melted at a pit-type electric resistance furnace named SG2-7.5 kW under protective RJ-2 covering flux and Ar atmosphere.When Mg ingots were totally melted，Zn and Cu ingots preheated to 200°C were added to the magnesium liquid at 680°C.When the melting temperature rose to 760°C，Cr particles preheated to 200°C were added to the melt and kept for～30 min.Next，to refine and remove scum at 730°C，C2Cl6 refining agent with a weight ratio of 1:500 compared with the melt was added to the melt by mechanical stirring for2-3 min.Subsequently，at 710°C，after being held for 10-15 min，the melt was poured into a permanent mould made of steel preheated to 200°C.The specimens treated by SSIHT had the same size ofΦ15 mm×15 mm.

图表编号XD0049759100    严禁用于非法目的
绘制时间2019.01.01
作者Xiao-feng Huang、Ya-jie Ma、Qiao-qiao Zhang、Lang-lang Wei、Jian-qiao Yang
绘制单位State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, Lanzhou University of Technology、State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, Lanzhou University of Technology、State Key Laboratory of Advan
更多格式高清、无水印（增值服务）

相关图表

  1. 《Table 1:Nominal compositions of experimental Mg-5Sn-1Si alloys (wt.%)》2021.01.01
  2. 《Table 3:EDS results of experimental alloys (wt.%)》2021.01.01
  3. 《Table 1Composition of experimental diets.》2018.12.01
  4. 《表1 实验合金的化学成分 (质量分数, %) Tab.1 Chemical composition of experimental alloy (wt%)》2019.01.25
  5. 《Table 1.Chemical compositions of alloy 80A and filler wire ERNiCr-3》2019.02.01
  6. 《表1 实验用合金名义成分at (%) Tab.1 Nominal chemical composition of experimental alloys》2019.02.18
  7. 《Table 1:Chemical composition of tested alloys (mass%)》2019.03.01
  8. 《Table 1 Actual chemical compositions of the investigated alloys》2019.02.01
  9. 《Table 1 Analyzed compositions of the Mg-Li-Ca alloys》2019.02.01
  10. 《Table 1 Chemical compositions of the studied alloys (wt%)》2019.01.01
  11. 《表1 实验所用合金化学成分 (质量分数/%) Tab.1 The chemical composition of the experimental alloys (mass fraction/%)》2018.06.25
  12. 《Table 1 Chemical composition of the alloy (wt%)》2018.11.01
  13. 《Table 1 Chemical composition of the alloys (wt%)》2018.11.01
  14. 《Table 1 Chemical composition of A390 aluminum alloy (wt%)》2018.11.01
  15. 《Table 1 Chemical composition of 5A05 Al alloy (wt%)》2018.10.01
  16. 《Table 1 Chemical composition of the alloy powders (wt%)》2018.09.01
  17. 《Table 1 Chemical composition of ADC12 alloy (wt%)》2018.03.01
  18. 《表4 合金元素含量Table 4 Compositions of alloying elements》2018.02.15
  19. 《Table 1 Compositions of the experimental steels》2018.03.30
  20. 《Table 1.Chemical composition of Cu–Be alloys》2018.06.01

随机翻阅

《表7 ID-MAP认证机制中安全消息类型》 《表1 两组患者生活质量评分比较（±s，分）》 《表1 渗透系数统计：人工岛上新建建筑地下室的排水减压抗浮计算》 《表1 胀果甘草愈伤组织盐胁迫下NAC差异表达基因》 《表3 鞍山、营口和秦皇岛中厚板产线品种分布表》 《表3 粉碎时间对水合性质的影响》 《表1 两组患者一般资料比较》 《表1 两组护理后的治疗总有效率对比》 《表1 中国糖尿病风险评分表》 《表1 元素的分析波长：基于微波消解-ICP-OES法测定紫石英中矿物质元素含量》