《Table 1:Chemical composition of tested alloys (mass%)》
本系列图表出处文件名:随高清版一同展现
《Effect of Ca on microstructure and high temperature creep properties of AM60-1Ce alloy》
Commercial AM60 alloy was used as raw material,and magnesium–cerium and magnesium–calcium alloys were used as intermediate alloys.The AM60 alloy was melted in a crucible resistance furnace followed by the addition of Mg-1%Ce and Mg-30%Ca intermediate alloys,and then solution treated at 750°C and stirred to ensure that the intermediate alloys were dissolved completely.The molten alloy was held at 720°C for 30 min,and poured into a mold at 710°C.The mold(12 mm×100 mm×200 mm)was pre-heated to 180–200°C.Melting and stirring were carried out under argon to avoid magnesium-alloy oxidation.The chemical compositions of the four studied alloys are listed in Table 1.
图表编号 | XD0049760400 严禁用于非法目的 |
---|---|
绘制时间 | 2019.03.01 |
作者 | Wei Jin、Yu-lai Song、Yao-hui Liu、Ping Zhao、R.D.K.Misra |
绘制单位 | Key Laboratory of Automobile Materials (Ministry of Education), College of Materials Science and Engineering, Jilin University、Key Laboratory of Automobile Materials (Ministry of Education), College of Materials Science and Engineering, Jilin University、K |
更多格式 | 高清、无水印(增值服务) |