《Table 1.Sample dimensions and final porosity achieved after the sintering process for samples with

  提示：宽带有限、当前游客访问压缩模式

本系列图表出处文件名：随高清版一同展现

《Synthesis and characterization of copper foams through a powder metallurgy route using a compressible and lubricant space-holder material》

1. 获取 高清版本忘记账户？点击这里登录

1. 下载图表忘记账户？点击这里登录

The foam samples with various acrawax contents（both fine and coarse acrawax）ranging from 40vol%to 70vol%were processed at 300 MPa compaction pressure.Table 1 shows the effect of the added space holder on the final achieved porosity in the cases of both fine and coarse-pore foam samples.The copper foams with finer pores are designated as CF1，CF2，CF3，and CF4 and the coarser-pore foams as CF5，CF6，CF7，and CF8.