《Table 2 Bumper deformation in different welding sequences》
![《Table 2 Bumper deformation in different welding sequences》](http://bookimg.mtoou.info/tubiao/gif/ZYSY201902007_09700.gif)
本系列图表出处文件名:随高清版一同展现
《焊接顺序对6061-T6铝合金汽车结构件焊接残余应力及变形的影响(英文)》
The double-pulse MIG welding method was used to weld the aluminum alloy bumper.The bumper and the crash boxes were 2 mm-thick 6061-T6 aluminum alloy thin-plate sections.ER5356 aluminum alloy welding wire with a diameter of 1.2 mm was used as the consumable electrode.The chemical composition and mechanical properties of the welded sections and the welding wire were in accordance with the preliminary study[11].During the welding,the wire extension was17 mm,the shielding gas was 99.999%argon and the gas flow rate was 25 L/min.The specific technological parameters of the double-pulse MIG welding are shown in Table 1.
图表编号 | XD0064471700 严禁用于非法目的 |
---|---|
绘制时间 | 2019.02.01 |
作者 | 易杰、张见明、曹淑芬、郭鹏程 |
绘制单位 | 湖南大学汽车车身先进设计与制造国家重点实验室、湖南工业职业学院机械工程学院、湖南大学机械与运载工程学院、湖南大学汽车车身先进设计与制造国家重点实验室、湖南大学机械与运载工程学院、湖南大学汽车车身先进设计与制造国家重点实验室、湖南大学机械与运载工程学院、湖南大学汽车车身先进设计与制造国家重点实验室、湖南大学机械与运载工程学院 |
更多格式 | 高清、无水印(增值服务) |