《Table 9.Influence of the multi-step forming process on the thickness reduction error of sheet metal
提示：宽带有限、当前游客访问压缩模式
本系列图表出处文件名：随高清版一同展现
《Influence of a multi-step process on the thickness reduction error of sheet metal in a flexible rolling process》
To analyze the influence of the multi-step forming process on the thickness reduction error of sheet metal in the flexible rolling process，we used a target curvature radius of200 mm for the processed parts in the forming comparison experiment.The material is 1050 aluminum alloy，and the dimensions of sheet metals are 100 mm×200 mm×1.8mm（width×length×thickness）.The forming steps differ，whereas the other processing parameters are the same.The forming path and forming steps of the multi-step process are shown in Table 8.The processed convex surface parts are shown in Fig.19.The processed convex surface parts are smooth，with no wrinkling；the forming effect is good.Therefore，the multi-step forming process is feasible in the forming experiments.
| 图表编号 | XD0028409400 严禁用于非法目的 |
|---|---|
| 绘制时间 | 2019.01.01 |
| 作者 | Yi Li、Ming-zhe Li、Kai Liu |
| 绘制单位 | Dieless Forming Technology Center, Roll Forging Institute, Jilin University、College of Materials Science and Engineering, Jilin University、Dieless Forming Technology Center, Roll Forging Institute, Jilin University、College of Materials Science and Enginee |
| 更多格式 | 高清、无水印（增值服务） |
