《Table 1 Porous PLA microspheres prepared with different organic solvents and inner aqueous phase》

《Table 1 Porous PLA microspheres prepared with different organic solvents and inner aqueous phase》   提示：宽带有限、当前游客访问压缩模式
本系列图表出处文件名：随高清版一同展现
《Preparation of Porous Polylactide Microspheres and Their Application in Tissue Engineering》


  1. 获取 高清版本忘记账户？点击这里登录
  1. 下载图表忘记账户？点击这里登录

In the emulsion solvent evaporation method，the removal rate of organic solvent was reported to play an important role in deciding the morphology of microspheres.In this study，ethyl acetate and chloroform were chosen to prepare microspheres with different porous structures due to their different solvent removal rates[23].In addition，NH4HCO3 was also used in the inner aqueous phase to change the porous structure of PLA microspheres.Table 1 shows the preparation parameters of PLA microspheres with different porous structures.

图表编号XD0020170300    严禁用于非法目的
绘制时间2018.06.01
作者Xu-Dong Shi、Pei-Jian Sun、Zhi-Hua Gan
绘制单位Key Laboratory of Polymer Ecomaterials,Changchun Institute of Applied Chemistry,Chinese Academy of Sciences、The CAS Key Laboratory of Engineering Plastics,Institute of Chemistry,Chinese Academy of Sciences (CAS)、The CAS Key Laboratory of Engineering Plast
更多格式高清、无水印（增值服务）

相关图表

  1. 《Table 3.Application performances of the coatings prepared with La-MSPs》2019.02.01
  2. 《Table 2 Slump of concrete prepared with different aggregates》2019.02.01
  3. 《Table 2 I-V performance of DSCs constructed with meso-porous TiO2 photoanodes with different W-doping concentrations》2019.02.01
  4. 《表2 不同TPTI含量的PLA/TPTI/SF复合材料力学性能Tab 2 Mechanical properties of PLA/TPTI/SF composites with different TPTI contents》2019.01.20
  5. 《Table 2 Mechanical properties of PLA/DOP/NBR TPV with different vulcanizing time》2019.01.15
  6. 《Table 2 Damping properties of blends with different ACM/PLA》2019.01.15
  7. 《Table 1 Tganalysis of blends with different ACM/PLA》2019.01.15
  8. 《Table 3.Physical properties of wet and dry pellets prepared with different binders》2019.01.01
  9. 《Table 1 Vulcanization characteristics of natural rubber/silica composites prepared by different methods》2018.07.15
  10. 《Table 6PREPARE validation results, comparing our results with those published by Uzunoglu et al.[2]and Celik et al.[23].》2018.12.15
  11. 《Table 3 Mechanical properties of PLA/PPC/DCP blends with different DCP contents》2018.06.01
  12. 《Table 2 BSA encapsulation efficiency and production ratio of PLA microspheres prepared with different organic solvents a》2018.06.01
  13. 《Table 1 Porosity and properties of C-Zn EA-700/800/900/1000 porous carbon microsphere samples》2018.02.10
  14. 《表3 添加不同粒径的PMMA制备的多孔镍的孔隙率和平均孔径Table 3 Porosity and average pore size of porous Ni with different particle size of PMMA》2018.08.01
  15. 《表2 添加不同含量造孔剂下的多孔镍的孔隙率和平均孔径Table 2 Porosity and average pore size of porous Ni with different contents of PMMA》2018.08.01
  16. 《表2 在抗流挂性为400μm的情况下, 用不同稀释剂所制涂膜的性能Table 2 Properties of the coatings prepared with different diluents for achieving a sag》2018.07.30
  17. 《Table 3 HNTs/PTFE nanocomposites with different HNTs mass fractions prepared by employing ethanol solvent》2018.03.30
  18. 《Table 3.Flexural strength, density, and dimensions of rectangular-shaped Cu foams prepared with fine and coarse pores》2018.08.01
  19. 《表2 不同尺寸玻璃微球含量的乳化炸药爆速Table 2 Detonation velocity of emulsion explosive of glass microsphere with different contents》2018.04.01
  20. 《表2 不同多孔材料孔隙率下的压力出口最大质量流量Table 2 Maximum mass flow rate of the outlet of the tank filled with porous materials with diffe》2018.06.25

随机翻阅

《表1 两组疼痛程度对比（±s，分）》 《表1：刍议高职幼儿发展与健康管理专业幼儿美术基础课程的教与学》 《表3 2000—2017年Moran I指数表》 《表1 端口状态：综合航电分区间通信元模型设计研究》 《表2 两组新生儿的并发症发生情况比较（n=40,n/%）》 《表二东阳遗址浮选出土植物种子统计》 《表1 两组患者护理前后的效果评价》 《表3 附着力促进剂的性能参数》 《表1 不同类型化学键的特点》 《表4 接触角Tab.4 Contact angles》