《表8 工况D3的计算极值与实测极值对比Tab.8 Comparison of the calculation extreme value and the measured extreme value
在1号机甩75%Nr试验前,对工况D3进行初步计算。结合之前相近水头下同一机组甩25%Nr和甩50%Nr负荷试验实测值与计算值的对比分析,仍然采用逐步趋近的修正方法,对计算值进行合理修正后,用计算修正后的值预估甩负荷试验中各主要特征参数的极值表现。工况D3的计算极值与实测极值对比见表8。
图表编号 | XD0014087000 严禁用于非法目的 |
---|---|
绘制时间 | 2018.02.20 |
作者 | 文树洁、凡家异、陈泓宇、罗佑坤、李青 |
绘制单位 | 东方电气集团东方电机有限公司、东方电气集团东方电机有限公司、深圳蓄能发电有限公司、深圳蓄能发电有限公司、深圳蓄能发电有限公司 |
更多格式 | 高清、无水印(增值服务) |
查看“表8 工况D3的计算极值与实测极值对比Tab.8 Comparison of the calculation extreme value and the measured extreme value of the Condition D3”的人还看了
- 表2 抗弯承载力理论计算与ANSYS计算结果对比Table 2 Comparison between the theoretical calculation of flexural capacity and the results of A
- 表1 292 m高程处8号测点计算温度与实测温度对比Tab.1 Comparison of the calculated temperature and measured temperature at 8 points of 292 m h
- 表2 292 m高程处8号测点计算位移与实测位移对比Tab.2 Comparison of the calculated displacement and measured displacement at 8 points of 292 m