《Table 1 Test results of modulus of Ni Cr-Air coatings (GPa)》
本系列图表出处文件名:随高清版一同展现
《雾化气体对热喷涂NiCr涂层弹性模量的影响(英文)》
#1:mean of Ec for relative IET;#2:mean of Ec for three-point bending
The specific mechanical resonance frequencies of the Q235steel bar were tested by IET,and the elastic modulus of the substrates,~218.96 GPa,was calculated by Eq.(4).Five Ni Cr-Air samples were used to determine the modulus of the coatings,and Ec could be calculated by Eq.(13)(as shown in Table 1) .Also the five Ni Cr-Air coating samples could be used in the three-point bending tests,because the impulse excitation tests are nondestructive.And the elastic modulus of the Q235steel,~196.53 GPa,was got using the three-point bending tests.The three-point bending measurements of the elastic modulus of the five Ni Cr-Air coating samples are also shown in Table 1.
图表编号 | XD0011226900 严禁用于非法目的 |
---|---|
绘制时间 | 2018.04.01 |
作者 | 聂光临、包亦望、万德田、刘小根 |
绘制单位 | 中国建筑材料科学研究总院绿色建筑材料国家重点实验室、中国建筑材料科学研究总院绿色建筑材料国家重点实验室、中国建筑材料科学研究总院绿色建筑材料国家重点实验室、中国建筑材料科学研究总院绿色建筑材料国家重点实验室 |
更多格式 | 高清、无水印(增值服务) |