《Table 6 Typical mechanical properties of Mn-TRIP steels》
本系列图表出处文件名:随高清版一同展现
《Recent progress in the development and application of the new Gen. AHSS at Baosteel》
In 2014,Baosteel successfully completed an industrial trial for developing products of uncoated and galvanized M n-TRIP steels w ith TS of 1 000and 1 200 M Pa,respectively,the chemical composition and typical mechanical properties of w hich are show n in Tables 5 and 6.Their formability,including bendability,hole expansion ratio,forming-limit diagram(FLD);their application properties,including delayed fracture properties,dynamic tensile test,and tensile test at various temperatures;and their w eldability w ere systematically evaluated to determine the practical application potential of these steels.These steels w ere also used to make some of the parts in BCB(left rear floor side member rear),as show n in Fig.9.
图表编号 | XD004654000 严禁用于非法目的 |
---|---|
绘制时间 | 2018.12.30 |
作者 | ZHONG Yong、WANG Li、ZHANG Yulong |
绘制单位 | Research Institute,Baoshan Iron & Steel Co.,Ltd.、State Key Laboratory of Development and Application Technology of Automotive Steels( Baosteel)、Research Institute,Baoshan Iron & Steel Co.,Ltd.、State Key Laboratory of Development and Application Technology |
更多格式 | 高清、无水印(增值服务) |
查看“Table 6 Typical mechanical properties of Mn-TRIP steels”的人还看了
- 表4 18Cr Ni Mo7-6钢不同预备热处理、不同取样部位的力学性能Table 4 The mechanical properties of 18Cr Ni Mo7-6 steel with different preheat trea