《Table 1 Tensile properties of as-extruded Mg-Zn-Ce alloys》
提示:宽带有限、当前游客访问压缩模式
本系列图表出处文件名:随高清版一同展现
《"Microstructures and Tensile Properties of Hot-extruded Mg-6Zn-xCe(x=0,0.6,1.0,2.0) Alloys"》
The mechanical property test results(Table 1)revealed that a small amount of Ce had significant effect on tensile strength of Mg-6Zn alloy.With 0.6%Ce addition,the improvements of yield strength(YS)and ultimate tensile strength(UTS)were about 24MPa and 15 MPa,respectively.However,with further increasing Ce content,the YS and UTS were decreased slightly.It is noted that the differences of YS and UTS between Mg-6Zn-0.6Ce and Mg-6Zn-1Ce was less than 5 MPa.Mg-6Zn alloy without Ce addition showed good ductility,and the elongation was decreased with increasing Ce content.
图表编号 | XD0043328300 严禁用于非法目的 |
---|---|
绘制时间 | 2019.02.01 |
作者 | 于合帅、杨文朋、CUI Hongbao、GUO Xuefeng、WANG Ying、WU Yali |
绘制单位 | School of Materials Science and Engineering, Henan Polytechnic University、School of Materials Science and Engineering, Henan Polytechnic University、Henan International Joint Research Laboratory for High-Performance Light Metallic Materials and Numerical S |
更多格式 | 高清、无水印(增值服务) |