《Table 2 Removal rate of total Cd and energy consumption at the end of electrokinetic remediation》
本系列图表出处文件名:随高清版一同展现
《Study on Electrokinetic Remediation of Cadmium-contaminated Soil》
According to the calculation methods of the removal rate of total Cd and energy consumption,the removal rates of total Cd and energy consumption in the four groups were calculated,as shown in Table 2.The removal rate of total Cd increased with the electric field intensity increasing,which was because the intensity of electric field directly influenced the intensity of the hydrolysis reaction in the electrolyte.Generally,a higher current causes an intenser electrochemical reaction[15].However,the higher the voltage,the higher the current,and the more the energy consumption[16].When the electric field intensity increased from 2.5 to 3 V/cm,the removal rate of total Cd increased by 10.62%;and when the electric field intensity increased from 3 to 3.5 V/cm,the removal rate only increased by 1.87%.Comprehensively,the electric field intensity of 3 V/cm was more proper.
图表编号 | XD0028000900 严禁用于非法目的 |
---|---|
绘制时间 | 2019.02.01 |
作者 | Meng SHEN、Yanqiu CHEN、Hui HAN、Xin WEN、Min SHAO、Mingxin WANG、Yushan WAN |
绘制单位 | College of Environment and Safety Engineering,Changzhou University、College of Environment and Safety Engineering,Changzhou University、College of Environment and Safety Engineering,Changzhou University、College of Environment and Safety Engineering,Changzho |
更多格式 | 高清、无水印(增值服务) |
查看“Table 2 Removal rate of total Cd and energy consumption at the end of electrokinetic remediation”的人还看了
- Table 2 The energy value of EV and EC of Fe2Si bulk at the high-symmetry points in the Brillouin zone
- 表4 投加高含量锁磷剂时磷的去除率和锁磷剂利用率Tab.4 The removal rate of phosphorus and the utilization rate of phoslock in high content phoslo