《Table 1 Optimized condition of three sample preparation methods》

《Table 1 Optimized condition of three sample preparation methods》   提示:宽带有限、当前游客访问压缩模式
本系列图表出处文件名:随高清版一同展现
《中国原子能科学研究院加速器质谱实验室的~(14)C样品制备技术研究进展》


  1. 获取 高清版本忘记账户?点击这里登录
  1. 下载图表忘记账户?点击这里登录

In order to satisfy 14C measurement with the new developed 200kV single stage electrostatic accelerator mass spectrometer,the sample preparation processes for 14C were investigated.The graphitization experimental conditions for H2-Fe,Zn-Fe and Zn-H-Fe methods were optimized on self-designed 14C sample preparation system.The beam current of 12C-for all prepared samples can reach 15-40μA and its stability is better than0.2%.The 14C measurement shows that the lower ratio of(12CH-+13C-)/12 C-benefits the high sensitive and miniaturization device.The result also shows that the Zn-Fe method can depress the ratio of(12CH-+13C-)/12C-for the samples with the carbon content less than 1mg,while,for the carbon content among 1 mg to5mg,the Zn-Fe and Zn-H-Fe methods have the equivalent effect.Through above preparation methods,the yield of carbon can reach more than95%for the carbon content of 100μg-5mg.