《表4 碳钢铸件正火回火加热温度 (2) Table 4 Heating temperature of normalizing and tempering for carbon steel casti
来自生产一线的信息,一般对于力学性能有要求的、质量在1 t以下、截面小于150 mm、外形简单、轮廓尺寸在1200 mm以内的小型碳素钢铸件,正火以后可免去回火。铸钢件质量在10 t以下,轮廓尺寸小于2500 mm的中型件,以及质量10 t以上的的大型件,一般正火以后需进行回火处理。其工艺见表3、表4。
图表编号 | XD0022050600 严禁用于非法目的 |
---|---|
绘制时间 | 2018.02.25 |
作者 | 赵步青、刘春菱、张丹宁 |
绘制单位 | 安徽嘉龙锋钢刀具有限公司、常州市新城光大热处理有限公司、南京工业大学2011学院 |
更多格式 | 高清、无水印(增值服务) |
查看“表4 碳钢铸件正火回火加热温度 (2) Table 4 Heating temperature of normalizing and tempering for carbon steel castings (2)”的人还看了
- 表1 不同加热模式下的PI型板温控制器参数Tab.1 Parameters of PI type temperature controller under different heating modes