《Table 3 Tensile and barrier properties of PEF-Furan and comparison with PET》

  提示：宽带有限、当前游客访问压缩模式

本系列图表出处文件名：随高清版一同展现

《From Furan to High Quality Bio-based Poly(ethylene furandicarboxylate)》

1. 获取 高清版本忘记账户？点击这里登录

1. 下载图表忘记账户？点击这里登录

a Thickness of PET and PEF films was 172 and 201μm，respectively.

In order to evaluate the quality of PEF prepared from different FDCA（PEF-HMF and PEF-Furan，respectively），their thermal properties were investigated by DSC and TGA（Fig.6 and Table 2）.It was noted that all the PEF samples，regardless of the FDCA used as starting material，showed a glass transition temperature of~87°C，a weak melting point at~214°C and a temperature of 5%weight loss at about380°C.These results were similar to those reported[42，43]，and indicated that the thermal properties of PEF were not affected by the origin of FDCA.In another word，the possible trace impurities co-existing with HMF/FDCA did not influence the thermal properties of resulted PEF，though the coloration was observed.With FDCA preparation from furfural by Henkel reaction，not only the target product 2，5-FDCA was formed，but also the isomers，2，4-FDCA and 3，4-FDCA.Purification of 2，5-FDCA became much difficult and high-costing[11，28].The presence of 2，4-FDCA or 3，4-FDCA will seriously affect the thermal properties of resulted PEF，leading to a much lower glass transition temperature and melting temperature with also a weak crystallization[44].