《Table 1:Temperature of melts》
本系列图表出处文件名:随高清版一同展现
《Microstructural evaluation and mechanical properties of 7075 aluminum alloy prepared by controlled diffusion solidification》
Two SG-7.5-10 electric-resistance furnaces were employed to heat the precursor melts.The#1 electric-resistance furnace was used to melt Al-Zn11.2-Mg5-Cu3 alloy at 720°C.Then 1%C2Cl6 was added into the melt for refinement.The#2 electricresistance furnace was utilized to melt pure Al at 760°C.Furthermore,pure Al(660°C)was poured into the Al-Zn11.2-Mg5-Cu3 alloy(620°C),and the two melts were then mixed quickly by stirring.When the temperature of the alloy dropped to 637°C,the mixed melt was poured into a permanent mold(preheated at 200°C)to obtain aΦ15 mm×150 mm cylindrical ingot.Figure 1 shows the controlled diffusion solidification(CDS)casting process.
图表编号 | XD0088361300 严禁用于非法目的 |
---|---|
绘制时间 | 2019.07.01 |
作者 | Xiong Yang、Yuan-dong Li、Xiao-mei Luo、Hong-wei Zhou、Qi-yong Cai、Ming Li、Ying Ma |
绘制单位 | State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Lanzhou University of Technology、State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Lanzhou University of Technology、State Key Laboratory of Adv |
更多格式 | 高清、无水印(增值服务) |