《Table 1 Materials properties (T=293 K, P=0.1 MPa)》
本系列图表出处文件名:随高清版一同展现
《Modeling of Continuous Cross-flow Microfiltration Process in an Airlift External-loop Slurry Reactor》
As shown in Figure 1,there are liquid phase and solid phase in the reactor,because they are mixed so well that they could be considered as one slurry phase.The gas phase goes into the riser in the form of bubbles through a distributor and then most of them could remain in the gas/slurry separator.There are nearly no bubbles existing in the downcomer,so the slurry could circulate in the reactor because of density difference between the riser and the downcomer.When the slurry enters the downcomer,the liquid/solid mixture could be separated in the filter by transmembrane pressure.The permeate would return to the reactor and the condensed slurry could return to the riser.The permeate flux was measured by the gravimetric method and the cumulative mass distribution of solid particles was measured by a laser particle size analyzer(Mastersizer)as shown in Figure 2.Air,water and FCC equilibrium catalysts represent the gas phase,the liquid phase,and the solid phase,respectively.Materials properties are listed in Table 1.
图表编号 | XD0029186400 严禁用于非法目的 |
---|---|
绘制时间 | 2019.03.30 |
作者 | Zheng Bo、Tang Xiaojin、Zhang Zhanzhu、Zong Baoning |
绘制单位 | SINOPEC Research Institute of Petroleum Processing、SINOPEC Research Institute of Petroleum Processing、SINOPEC Research Institute of Petroleum Processing、SINOPEC Research Institute of Petroleum Processing |
更多格式 | 高清、无水印(增值服务) |