《Table 3 Radial force at differentβ4》

《Table 3 Radial force at differentβ4》   提示：宽带有限、当前游客访问压缩模式
本系列图表出处文件名：随高清版一同展现
《Effect of guide vane outlet angle on pump performance and impeller radial force in an axial-flow heart pump》


  1. 获取 高清版本忘记账户？点击这里登录
  1. 下载图表忘记账户？点击这里登录

In order to analyze the characteristics of radial force fluctuation，Table 3 displays specific data for maximum radial force，minimum radial force and peakvalley pulsation value with differentβ4.Whenβ4falls from 20°to 3°，the maximum radial force is 0.0501N，which is at 3°；the minimum radial force is 0.0432N whenβ4is 10°.Meanwhile，the minimum peak-valley pulsation value appears at 10°too，which is about 80%of the maximum value from 0.0392N to 0.0489N.

图表编号XD0020600800    严禁用于非法目的
绘制时间2018.06.01
作者刘复飞、Sang Xiaohu
绘制单位School of Information Engineering,Wuhan University of Technology、School of Mechatronics Engineering and Automation,Shanghai University
更多格式高清、无水印（增值服务）

相关图表

  1. 《Table 3 Sectional internal force of members at the peak load》2020.11.22
  2. 《表4 冻融作用下拉拔试验拉力峰值Table 4 The mean maximum pulling forces at the root-soil interface of Zoysia japonica, Eleusine indica a》2018.08.25
  3. 《Table 3 Comparison of average morphological characteristics and uprooting forces of different species.》2019.03.01
  4. 《Table 1 Results of forced degradation study of MAC at different stressed conditions》2019.01.08
  5. 《表2 顶升及回落工况下辅助墩位置处支点反力Tab.2 Support Reaction Forces in the Position of Auxiliary Pier at Different Jacking and Falling He》2019.02.28
  6. 《Table 4 Measurement result of radioactive source at different positions》2019.07.01
  7. 《表4 接触位置处的受力分析Table 4 Force analysis in different contact position》2018.02.28
  8. 《表1 不同温度下可逆电池的电动势Tab.1 Electromotive force of the reversible cell at different temperatures》2018.12.25
  9. 《表6 不同撞击点的临界撞速和临界撞击力Tab.6 Critical impact velocities and force at different impact points》2018.06.01
  10. 《表2 x=0.15配方不同烧结温度β-Al2O3相的相对含量Table 2 x=0.15 formulas at different sintering temperatures andβ\"phase relative content》2018.09.01
  11. 《表4 支座径向力情况Table 4 Radial force of support》2018.04.01
  12. 《Table 4 Pressure forces at five rotational speeds and△P=5000Pa without eccentricity (e=0.0000m)》2018.03.01
  13. 《Table 6 Viscous forces at five rotational speeds and△P=5000Pa without eccentricity (e=0.0000m)》2018.03.01
  14. 《Table 5 Pressure forces at five rotational speeds and△P=5000Pa with eccentricity (e=0.0002m)》2018.03.01
  15. 《Table 7 Viscous forces at five rotational speeds and△P=5000Pa with eccentricity (e=0.0002m)》2018.03.01
  16. 《Table 5 Static first hyperpolarizability (β0) at different levels of 1a-6a》2018.08.01
  17. 《Table 4 Static first hyperpolarizability (β0) at different levels of 1a-6a》2018.08.01
  18. 《Table 4 Toluene adsorption parameters at different bed heights》2018.03.30
  19. 《表4 不同剂量电子束辐照处理对鲈鱼半成品剪切力的影响Table 4 Effect of different doses of irradiation treatments on shear force of SFPMS》2018.09.10
  20. 《Table 4 The parameters of the simulation at different temperature》2018.02.01

随机翻阅

《表2 不同助剂的临界胶束浓度及其对应表面张力(mean±SD,n=5)》 《表2 装卸工艺方案比选表》 《表1 Y公司发展的SWOT分析》 《表3 磨削变质层厚度测量值》 《表5 接触面应力分布影响因素分析表》 《表2 采样频率对最优采样弧长的影响》 《表1 制冷剂各进出口温度和压力表》 《表1 硅丙乳液添加量对杂化乳液性能的影响》 《表1 不同水稻品种的生育进程、生育期对比》 《表1 正交试验因素和水平表》