《Table 3 Operating conditions under various solids circulation fluxes》

《Table 3 Operating conditions under various solids circulation fluxes》   提示：宽带有限、当前游客访问压缩模式
本系列图表出处文件名：随高清版一同展现
《Influence of Solids Circulation Flux on Coal Gasification Process in a Pressurized High-density Circulating Fluidized Bed》


  1. 获取 高清版本忘记账户？点击这里登录
  1. 下载图表忘记账户？点击这里登录

The solids circulation flux has obvious effect on the flow hydrodynamics in the riser，which can provide different environment for chemical reactions in the gasifier.To study the effect of solids flux on the gasification performances in the riser，the initial volume fraction of bed material is varied，and other input parameters are set the same as Case 1 listed in Table 2.The solids circulation flux discussed in this section refers to the computed solids flux out of the riser.The simulated cases under different solids fluxes are listed in Table 3.

图表编号XD0039672900    严禁用于非法目的
绘制时间
作者ZHANG Yawen、LEI Fulin、XIAO Yunhan
绘制单位Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), School of Chemical Engineering and Technology, Tianjin University、Key Laboratory of Advanced Energy and Power, Institute of Engineering Thermophysics, Chinese Academy of Scienc
更多格式高清、无水印（增值服务）

相关图表

  1. 《Table 1:Geometrical parameters, operating conditions and physical properties related to ESR process》2019.03.01
  2. 《Table 1 Experiment operating conditions》2019.01.03
  3. 《表4 各种计算条件下最大应力值Tab.4 The maximum stress under various calculation conditions》2019.02.25
  4. 《表3 不同出力工况下煤粉细度R90 (%) Tab.3 Fineness of pulverized coal under various work conditions R90 (%)》2019.02.20
  5. 《表4 各工况下磨煤机运行参数Tab.4 Operating parameters of mill under various work conditions》2019.02.20
  6. 《表1 不同工况汽轮机热力参数Tab.1 Thermal parameters of steam turbine under different operating conditions》2019.02.20
  7. 《Table 2 Operating conditions and experiment results》
  8. 《表3 不同工况下风电机组主机架应力Tab.3 Stress of main frame for wind turbines under different operating conditions》2019.01.05
  9. 《表3 各工况热分析最高温度汇总Tab.3 Maximum temperatures of thermal analysis under various operating conditions》2018.10.01
  10. 《Table 1–The WLA system operating conditions from 2013 to 2016.》2018.11.15
  11. 《表6 第二种工况试验数据Tab.6 Experimental data under the second operating condition》2018.05.17
  12. 《表5 第一种工况试验数据Tab.5 Experimental data under the first operating condition》2018.05.17
  13. 《表4 各工况下拟合函数的参数Tab.4 Fitting function parameters under various conditions》2018.11.15
  14. 《表2 不同工况下各喷口风率分配Tab.2 Ratio of various air distributions under different nozzle operating conditions》2018.08.15
  15. 《Table 3.Main model operating conditions and materials.》2018.10.01
  16. 《Table 2 Strength analysis results of the complex operating conditions》2018.04.30
  17. 《表1 不同条件下的开关函数Tab.1 Switching functions under various conditions》2018.08.25
  18. 《表3 不同硬性阴影工况下IAFSA-GM仿真结果Tab.3 Simulation results of IAFSA-GM under various hard shadow conditions》2018.04.10
  19. 《表1 不同气象类型下灰色关联度分析结果Tab.1 Analytical results of GRA under various weather conditions》2018.04.10
  20. 《表2 不同工况下轴承发热量Tab.2Heat generation of bearing under different operating conditions》2018.12.05

随机翻阅

《表4 旋转后的因子荷载矩阵》 《表1“浑水变清水”活动的内容变化》 《表1 组卷设置：集家客装维人员等级评定管理》 《表1 中老陆路口岸外来入侵植物信息及危害程度》 《表3 2014年广东省涉水产品卫生监督抽检工作情况》 《表5 Ⅲ型（弱）黄萎病菌株34个对茄子鉴别寄主的致病力》 《表9 阴性对照组及空白对照组孵育》 《表2 患者治疗前后上肢FMA评分比较》 《表1 样机首次进行温升研究性试验》 《表3 伯克利学生期末评教内容[31]》