《表8 80g, 300mm工况下位移的计算及试验结果Tab.8 Computation and test results of plate displacement》
根据试验结果,对于药量80g,爆距为300mm时,中心出现轻微的破孔失效,单元脱离无法读取中心位移,试验测得距中心3cm处平均位移为56.87mm,读取计算模型相应位置处单元的位移为62.30mm.从表8可以看出,计算结果相比试验结果的误差为9%,吻合度较好.
图表编号 | XD002954400 严禁用于非法目的 |
---|---|
绘制时间 | 2018.12.01 |
作者 | 解江、姜超、周书婷、李翰、冯振宇 |
绘制单位 | 中国民航大学适航学院、民用航空器适航与维修重点实验室、中国民航大学适航学院、民用航空器适航与维修重点实验室、中国民航大学适航学院、民用航空器适航与维修重点实验室、中国民航大学适航学院、民用航空器适航与维修重点实验室、中国民航大学适航学院、民用航空器适航与维修重点实验室 |
更多格式 | 高清、无水印(增值服务) |
查看“表8 80g, 300mm工况下位移的计算及试验结果Tab.8 Computation and test results of plate displacement”的人还看了
- 表2 292 m高程处8号测点计算位移与实测位移对比Tab.2 Comparison of the calculated displacement and measured displacement at 8 points of 292 m
- 表2 低温再热蒸汽管道各工况支吊架工作载荷及位移计算结果Tab.2 Calculation results of working load and displacement of the suspensions and supports i