《Table 5Material parameters of JWL-Miller model for explo-sives》
本系列图表出处文件名:随高清版一同展现
《CL-20基含铝炸药水下爆炸实验研究与数值模拟(英文)》
The experiment was conductedina2 m×2 m×2 m water tank.The surface height of water in the tank was 1.6 m.The charge was placed at the center0.8 m below the water surface.The distance between explosion center and pressure transducer was0.7 m.The high-speed camera was put 1.4 m away from the explosion source.To avoid the influence of reflected shock wave on the bubble pulsation process,a white low impedance material was attached to the wall of the water tank,because the low impedance materials generally have an excellent shock attenuating capacity.Explosion charge,pressure transducer and high-speed camera were located in the same horizontal line.The scheme of the small explosion water tank was shown in Fig.1.In this underwater explosion experiment,CL-20-based explosive and CL-20-based aluminized explosive were used.The mass of each sample is 5 g.The height of each sample is 15 mm.The composition and densities of the charges are listed in Table 1.Every sample was tested twice in parallel.
图表编号 | XD0026269600 严禁用于非法目的 |
---|---|
绘制时间 | 2018.08.25 |
作者 | 冯凇、饶国宁、彭金华 |
绘制单位 | 南京理工大学化工学院、南京理工大学化工学院、南京理工大学化工学院 |
更多格式 | 高清、无水印(增值服务) |
查看“Table 5Material parameters of JWL-Miller model for explo-sives”的人还看了
- Table 4 Adsorption kinetics parameters for Pseudo-first-order model and Pseudosecond-order model of Ni2+on HBCx