《表2 实际生产不同酸洗槽的酸液浓度控制Tab.2 Acid concentration control of during the actual production of different pi
由图3可以看出,盐酸溶液的共沸点浓度是20%(220 g/L)。因此,在实际生产过程中盐酸浓度必须小于溶液的共沸点20%(220 g/L)[1]。否则,易造成蒸发产生的盐酸中的HCL损耗太大。目前,来自酸再生系统新酸的浓度一般控制在180~200 g/L(表2)。通过实践发现,酸再生产生的新酸浓度上下相差10 g/L对酸洗时间没有太大的影响。
图表编号 | XD0024379800 严禁用于非法目的 |
---|---|
绘制时间 | 2018.09.28 |
作者 | 李帅、赵卫红、王单 |
绘制单位 | 河钢集团邯钢公司冷轧厂、河钢集团邯钢公司冷轧厂、河钢集团邯钢公司冷轧厂 |
更多格式 | 高清、无水印(增值服务) |
查看“表2 实际生产不同酸洗槽的酸液浓度控制Tab.2 Acid concentration control of during the actual production of different pickling grooves”的人还看了
- 表2 模型匹配情况仿真结果的水中余臭氧质量浓度控制响应性能指标Tab.2 Performance indices of control response of concentration of ozone residual in water
- 表3 模型失配情况仿真结果的水中余臭氧质量浓度控制响应性能指标Tab.3 Performance indices of control response of concentration of ozone residual in water