《Table 4 Diameter, strength and breaking elongation data of single fiber of the three samples, befor

《Table 4 Diameter, strength and breaking elongation data of single fiber of the three samples, befor   提示：宽带有限、当前游客访问压缩模式
本系列图表出处文件名：随高清版一同展现
《Influence of Mercerization on Cotton Fiber Varieties from Different Regions》


  1. 获取 高清版本忘记账户？点击这里登录
  1. 下载图表忘记账户？点击这里登录

The physical properties of cotton fibers，such as length，fineness，strength and maturity have great influence to the yarns and the final textile products.Here the physical properties of the single fiber of samples，including strength，breaking elongation w ere investigated before and after mercerization，and the data are show n in Table 4.Also，the average diameters of fibers，measured in SEM images w ere listed in Table 4.

图表编号XD0014951300    严禁用于非法目的
绘制时间2018.10.31
作者王华、MUGAANIRE Tendo Innocent
绘制单位State Key Laboratory of Textile Science &Technology,Ministry of Education,Donghua University、State Key Laboratory of Textile Science & Technology,College of Textiles,Department of Textile Engineering and Technology,Donghua University
更多格式高清、无水印（增值服务）

相关图表

  1. 《Table 4 Variance analysis of seedling height and ground diameter of different families》2018.10.01
  2. 《表2 不同固溶工艺下AZ80镁合金的平均晶粒尺寸、抗拉强度及伸长率Tab.2 Average grain size, tensile strength and elongation of AZ80 magnesium alloy under》2019.02.25
  3. 《表2 改性HDPE薄膜断裂伸长率和拉伸强度Tab 2 Elongation at break and tensile strength of modified HDPE film》2019.01.20
  4. 《表4 MMT/超支化PA6纳米复合材料薄膜的拉伸强度和断裂伸长率参数表Tab 4 The characteristic of tensile strength and elongation at break of montmorilloni》2019.01.20
  5. 《Table 4 Specific area, pore volume and pore diameter distribution of MnFeOx nanorods》2019.04.01
  6. 《表2 不同负载比例制备的抗老化助剂的PE薄膜断裂伸长率的紫外老化试验结果Table 2 Ultraviolet aging results of elongation at break of polyethylene films》2018.02.28
  7. 《表4 束界面剪切强度测试结果的正态分布分析Table 4 Normal distribution analysis of data of bundle interfacial strength》2018.05.30
  8. 《表4 不同延伸率后型材的屈服强度Table 4 The yield strength of profiles with different elongation》2018.02.25
  9. 《Table 1 Tensile strength and elongation at break of conductive papers containing different PDA-GO content》2018.10.01
  10. 《表3 最大径、ADC值和T2 WI、DWI及T1-VIBE序列的SINEN/SIM值比较Tab 3 Comparison of mean greatest diameter, ADC and SINEN/SIMafrom four MR s》2018.08.28
  11. 《表4 抑制性、返排性能、破胶性能评价Table 4 Evaluation of inhibition, flowback performance and gel breaking performance》2018.08.20
  12. 《表2 不同锻造方式下30Cr Ni2Mo V钢的抗拉强度和伸长率Table 2 Tensile strength and elongation of steel30Cr Ni2Mo V under different forging met》2018.01.25
  13. 《表5 库车迪北侏罗系粗砂岩样品孔喉、孔径变化分析结果Table 5 Pore diameter and throat diameter data of the coarse sandstone samples from Dibei in K》2018.03.10
  14. 《表3 孔喉直径数据Table 3 Data of the pore throat diameter》2018.08.01
  15. 《Table 4 Orthogonal table of tensile strength, bursting strength and tearing strength》2018.04.30
  16. 《表2 3种涂层的拉伸强度和断裂伸长率Table 2 Tensile strength and elongation at break of three coatings》2018.03.30
  17. 《表2 回火温度对钢棒断后伸长率的影响Table 2 Effects of tempering temperatures on the elongation at break of the steel bar》2018.06.15
  18. 《表2 各检测机构依据ISO-19095测得的Al和Cu与PPS结合体的抗张强度 (MPa) [22]Table 2 Tensile strength (MPa) data of the Al and Cu-PPS joints report》2018.07.10
  19. 《表4 不同处理条件下涤纶织物的断裂强力及强力损失率Table 4 The breaking strength and strength loss rate of the PET fabric samples experienced diff》2018.02.25
  20. 《表4 TP347HFG钢抗拉强度、Rp0.2、伸长率及硬度值Table 4 Tensile strength, Rp0.2, elongation and hardness values of TP347HFG steel》2018.01.25

随机翻阅

《表3：四省藏区2011～2018年涉农贷款配置效率横向比较》 《表3 滑坡危险度等级划分与因子赋值》 《表2 单进路联络道与多进路联络道采矿工艺作业时间对比表》 《表4 20个省市《方案》COVID-19中期中医药治疗所用中药频次分布(前10位)》 《表9 南宁、崇左、龙州水文站采用移动分析法预测2018年年最高水位精度统计表》 《表2 治疗前后囊肿体积大小比较（cm3)》 《表3水泵效率试验结果与合同保证值比较》 《表1 直肠间质瘤患者的一般资料》 《表2 欺诈类垃圾短信的直接效应与间接效应估计Tab.2 The direct effect and indirect effect of fraud SMS》 《表1 公共部门绩效考核对象策略性回应影响因素的假设检验》