《Table 1 Physical and chemical properties of biodiesel and liquid paraffin》
本系列图表出处文件名:随高清版一同展现
《Effect of Biodiesel Soot on Tribological Behavior of Liquid Paraffin》
Biodiesel was made from soybean oil via transesterification with methanol over the self-made green biomass ash catalyst[13].Table 1 shows the physical and chemical properties of biodiesel.Biodiesel soot(BDS)was collected using a self-made soot trap from the combustion of biodiesel[12].The collection of BDS comprised the following steps.Biodiesel was burned out in a porcelain crucible at normal temperature and atmospheric pressure.A glass slide(soot capture slide)was held above the flame of biodiesel until a soot layer with a few micrometers in thickness was deposited[14].This soot layer was then scraped off from the slide and was very carefully cleaned and collected in a glass bottle.Finally the collected soot was dried under a vacuum condition at 120°C for 3 h and was ground to become a fine granular powder.LP was purchased from the Hengshui Diyi Petroleum Chemical Co.,Ltd.in China,with its physical and chemical properties shown in Table 1.The individual oil samples were composed of:LP+1%of BDS,LP+2%of BDS,LP+3%of BDS,LP+4%of BDS,and LP+5%of BDS,respectively.The oil samples were stirred using a glass rod for 15 min.Finally,the oil samples were prepared under continuous magnetic stirring for 1 h to reduce experimental deviation.
图表编号 | XD0011307400 严禁用于非法目的 |
---|---|
绘制时间 | 2018.09.30 |
作者 | Li Chuan、Wei Daozhu、Zhuang Yuan、Song Ruhong、Hu Xianguo |
绘制单位 | School of Mechanical Engineering, Hefei University of Technology、School of Mechanical Engineering, Hefei University of Technology、School of Automobile and Transportation Engineering, Hefei University of Technology、School of Mechanical Engineering, Hefei U |
更多格式 | 高清、无水印(增值服务) |