《DOS 3.1-6.xx高级特性和综合技术参考 DOS报错信息、基本概念、命令详解》

上篇 DOS报错信息1

Abort,Ignore,Retry,Fail DOS报错信息1

Abort,Ignore,Fail DOS报错信息2

Access Denied DOS报错信息2

A copy of the EGA Device Driver is already loaded DOS报错信息2

A copy of the EGA Device Driver is not installed DOS报错信息3

Active code page not available from CON device DOS报错信息3

A20 Hardware error DOS报错信息4

Allocation error,size adjusted DOS报错信息4

Allocation failed or specified buffer too small DOS报错信息4

An incompatible Doskey is already installed DOS报错信息5

An invalid path to SETVER.EXE was specified DOS报错信息5

ANSI.SYS must be installed to perform requested function DOS报错信息5

APPEND already installed DOS报错信息6

APPEND/ASSIGN conflict DOS报错信息6

APPEND/TopView Conflict. DOS报错信息7

Arg list too long DOS报错信息7

ASC:SFC already in Use DOS报错信息7

Attempt to remove current directory DOS报错信息7

Bad address mark or drive not ready DOS报错信息9

Bad command line syntax DOS报错信息9

Bad command or file name DOS报错信息9

Bad command or parameters DOS报错信息10

Bad CRC on disk read DOS报错信息10

Bad device name DOS报错信息10

Bad file number DOS报错信息10

Bad numeric argument DOS报错信息11

Bad option! DOS报错信息11

Bad or missing Command Interpreter DOS报错信息11

Bad or missing filename DOS报错信息12

Bad or missing keyboard Definition File DOS报错信息12

Bad Partition Table DOS报错信息13

Batch file missing DOS报错信息13

Because your target drive is either ASSIGNed,JOINed,or SUBSTed it is actually the same as the source drive DOS报错信息14

Cannot change BUFSIZE DOS报错信息15

Cannot CHDIR to path,tree past this point not processed DOS报错信息15

Cannot CHDIR to root DOS报错信息16

Cannot CHKDSK a network drive DOS报错信息16

Cannot CHKDSK a SUBSTed or ASSIGNed drive DOS报错信息16

Cannot create a zero size partition DOS报错信息17

Cannot create extended DOS Partition without primary DOS Partition on disk 1 DOS报错信息17

Cannot create logical DOS Drive without an Extended DOS Partition on the current drive DOS报错信息17

Cannot delete Extended DOS Partition while logical drives exist DOS报错信息18

Cannot delete Primary DOS Partition on drive when an Extended DOS Partition exists DOS报错信息18

Cannot DISKCOMP to or from a network drive DOS报错信息18

Cannot DISKCOPY to or from a network drive DOS报错信息19

Cannot do binary reads from a device DOS报错信息19

Cannot execute filename DOS报错信息19

Cannot FDISK with network loaded DOS报错信息20

Cannot find FORMAT.COM DOS报错信息20

Cannot find GRAPHICS profile DOS报错信息20

Cannot find system Files DOS报错信息21

Cannot format an ASSIGNed or SUBSTed drive DOS报错信息21

Cannot format a network drive DOS报错信息22

Cannot FORMAT nonremovable drive x: DOS报错信息22

Cannot install.Already resident,or unknown status DOS报错信息22

Cannot JOIN a network drive DOS报错信息23

Cannot label a JOINed,SUBSTed or ASSIGNed drive DOS报错信息23

Cannot label a network drive DOS报错信息24

Cannot load COMMAND,System halted DOS报错信息24

Cannot load EGA Device Driver DOS报错信息24

Cannot loadhigh batch file DOS报错信息24

Cannot make directory entry DOS报错信息25

Cannot merge-code page mismatch DOS报错信息25

Cannot open specified country information file DOS报错信息25

Cannot operate on a SUBST drive DOS报错信息26

Cannot operate on specified drive(x).It may be a network drive DOS报错信息26

Cannot perform a cyclic copy DOS报错信息27

Cannot process a network,SUBST,or unrecognized disk DOS报错信息27

Cannot read file allocation table DOS报错信息27

Cannot read system area of disk DOS报错信息28

Cannot RECOVER an ASSIGNed or SUBSTed drive DOS报错信息28

Cannot RECOVER a network drive DOS报错信息29

Cannot recover.entry,processing continued DOS报错信息29

Cannot recover..entry,Entry has a bad attribute(or link or size) DOS报错信息29

Cannot setup exparded memory DOS报错信息29

Cannot specify both/DT and/DOS DOS报错信息30

Cannot specify default drive DOS报错信息30

Cannot start COMMAND,exiting DOS报错信息31

Cannot SUBST a Network drive DOS报错信息31

Cannot SYS to a Network drive DOS报错信息31

Cannot unload.Deletion-tracking software is not resident or is a different version. DOS报错信息31

Cannot unload resident deletion-traeling software.Vectors or memory have been altered DOS报错信息32

Cannot update the MIRROR control file DOS报错信息32

Cannot use FASTOPEN for drive x DOS报错信息32

Cannot use PRINT-Use NET PRINT DOS报错信息33

Cannot XCOPY from a reserved device DOS报错信息33

Cannot XCOPY to a reserved device DOS报错信息33

Can't find/open file:filename DOS报错信息34

Can't open input file:filename DOS报错信息34

Can't open output file:filename DOS报错信息35

Can't read file:filename DOS报错信息35

Can't read from input file:filename DOS报错信息35

Can't write to output file:filename DOS报错信息36

CHDIR..failed,trying alternate method DOS报错信息36

CHKDSK/F cannot be done in a Windows/DOSShell Command Prompt DOS报错信息36

Code page not prepared DOS报错信息37

Code page xxx not prepared for all devices DOS报错信息37

Code page xxx not prepared for system DOS报错信息37

Code page operation not supported on this device DOS报错信息38

Code page requested(xxx)is not valid for given keyboard code DOS报错信息38

Code pages cannot be prepared DOS报错信息38

Code page specified has not been prepared DOS报错信息39

Code page specified is inconsisted with the selected code page DOS报错信息39

Command line is too long DOS报错信息39

Compare error at OFFSET x DOS报错信息40

Compare error on side x,track y DOS报错信息40

Configuration too large for memory DOS报错信息40

Content of destination lost before copy DOS报错信息41

Controller failure DOS报错信息41

Convert lost chains to file(s)(Y/N)? DOS报错信息41

Could not close the MIRROR image file DOS报错信息42

Could not copy COMMAND.COM onto target disk DOS报错信息42

Could not expand second filename so as to match first DOS报错信息42

Could not open the MIRROR image file DOS报错信息43

Could not successfully undelete the file.Press A to abort or R to retry DOS报错信息43

Current drive is no longer valid DOS报错信息43

Current keyboard does not support this code page DOS报错信息44

Data error DOS报错信息45

Data was found in a file that appears to be a MIRROR control file.cannot continue DOS报错信息45

Delete tracking software must be installed before other PC Tools programs DOS报错信息45

Deletion-Tracking file not found DOS报错信息46

Destination directory does not exist:x DOS报错信息46

Device error during operation DOS报错信息47

Device or code page missing from font file DOS报错信息47

Device x notrepared DOS报错信息48

Directory already exists DOS报错信息48

Directory is joined,tree past this point not processed DOS报错信息48

Directory is totally empty,no.or.. DOS报错信息49

Directory not empty DOS报错信息49

Disk Boot failure DOS报错信息49

Disk error(BIOS code x)at cylinder y,drive z DOS报错信息50

Disk error reading(or writing)drive x DOS报错信息50

Disk error reading(or writing)FAT x DOS报错信息50

Disk full Edits lost DOS报错信息51

Disk full error writing to BACKUP Log File DOS报错信息51

Disk unsuitable for system disk DOS报错信息51

Divide overflow DOS报错信息51

DMA overrun on operation DOS报错信息52

Does x specify a file name or directory name on the target(F=file,D=directory)? DOS报错信息52

DOS Version must be 2.0 or higher DOS报错信息52

Drive already SUBSTed DOS报错信息53

Drive types or diskette types not compatible DOS报错信息53

Drive x could not be processed DOS报错信息54

Duplicate file name or file not found DOS报错信息54

Duplicate parameters not allowed DOS报错信息54

EMM386 Errors DOS报错信息55

Error accessing target file DOS报错信息56

ERROR:An Extended Memory Manager is already installed DOS报错信息57

Error during read of font file DOS报错信息57

Error executing FORMAT DOS报错信息57

Error executing the given Program DOS报错信息58

ERROR:HIMEM.SYS requires an 80x86-based machine DOS报错信息58

ERROR:HIMEM.SYS requires DOS 3.0 or higher DOS报错信息58

Error in compressed input file format:x DOS报错信息59

Error in CONFIG.SYS line x DOS报错信息59

Error in COUNTRY Command DOS报错信息59

Error in EXE file DOS报错信息60

Error loading operating System DOS报错信息60

Error:missing COMSPEC DOS报错信息60

ERROR:No available extended memory was found DOS报错信息61

Error:No program name given DOS报错信息61

Error occurred in environment variable DOS报错信息61

Error opening logfile DOS报错信息62

Error reading directory DOS报错信息62

Error reading fixed disk DOS报错信息62

Error reading GRAPHICS profile DOS报错信息63

Error reading hard disk DOS报错信息63

Error reading help file DOS报错信息63

Error reading partition table DOS报错信息64

Error reading system areas DOS报错信息64

Errors found F parameter not specified.Corrections will not be written to disk DOS报错信息64

Errors on list device indicate that it may be off-line.Please check it DOS报错信息65

Error tracking the MIRROR image file DOS报错信息65

ERROR:Unable to Control A20 line! DOS报错信息65

Error writing directory DOS报错信息66

Frror writing FAT DOS报错信息66

Error writing fixed disk DOS报错信息66

Error writing partition table DOS报错信息66

Error writing system areas DOS报错信息67

Error writing the MIRROR image file DOS报错信息67

Error writing to device DOS报错信息67

Error x sector＃y,code z DOS报错信息68

Error xx(unknown) DOS报错信息68

EXEC failure DOS报错信息69

Existing format differs from that specified.This disk cannot be unformatted DOS报错信息69

Expanded memory is inaccessible until EMM386 is re-activated DOS报错信息69

Expanded memory not available DOS报错信息70

Expanded memory services unavailable DOS报错信息70

ExtendedDOS Partition already exists DOS报错信息71

Extended Error x DOS报错信息71

Failure to access code page font file DOS报错信息72

Failure access device: DOS报错信息72

FASTOPEN already installed. DOS报错信息72

FASTOPEN cannot be installed under DOSShell DOS报错信息73

FASTOPEN EMS entry count exceeded.Use fewer entries DOS报错信息73

Fatal Error:Cannot allocate Memory for DOS DOS报错信息73

FCB unavailable DOS报错信息74

File access denied DOS报错信息74

File allocation table bad,drive x DOS报错信息74

File connot be converted DOS报错信息74

File cannot be copied onto itself DOS报错信息75

File Creation Error DOS报错信息75

File exists DOS报错信息75

File is READ-ONLY DOS报错信息76

File name must be specified DOS报错信息76

File not found DOS报错信息76

File not in PRINT queue DOS报错信息76

File1(or File2)only Has x Lines DOS报错信息77

Files are different sizes DOS报错信息77

Files modified since the MIRROR image file was created may be lost DOS报错信息77

File(s)not found DOS报错信息78

First allocation unit is invalid,entry truncated DOS报错信息78

First diskette bad or in incompatible DOS报错信息78

Fixed backup device x:is full DOS报错信息79

Fix-ups needed-base segment(hex): DOS报错信息79

Floating Point Errors. DOS报错信息79

Font file contents invalid DOS报错信息80

FOR cannot be nested DOS报错信息80

Format broken DOS报错信息80

FORMAT for/n switch is/n=xxxx DOS报错信息81

FORMAT not supported on drive x:Format terminated DOS报错信息81

Function not supported by network DOS报错信息81

Function not supported on this computer-x DOS报错信息81

General EMS error DOS报错信息83

General failure reading(or writing)drive x: DOS报错信息83

Handle not found DOS报错信息84

Has invalid allocation unit,file truncated DOS报错信息84

Help file could not be found DOS报错信息84

Help not available for this.command DOS报错信息84

HMA not available:loading DOS low DOS报错信息85

Illegal device name DOS报错信息86

Incompatible file version ＃ DOS报错信息86

Incompatible switches DOS 报错信息86

Incorrect APPEND Version DOS报错信息86

Incorrect DOS Version DOS报错信息87

Incorrect DOS Version,x code page driver cannot be initialized DOS报错信息87

Incorrect number of parameters-x DOS报错信息87

Incorrect parameters DOS报错信息88

Infinite retry not supported on network printer DOS报错信息88

Input file'x'already in expanded format DOS报错信息88

Insufficient disk space DOS报错信息89

Insufficient disk space on drive x: DOS报错信息89

Insufficient memory DOS报错信息89

Insufficient Memory for buffers. DOS报错信息90

Insufficient memory for COUNTRY.SYS file DOS报错信息90

Insufficient memory for UMBs or virtual HMA DOS报错信息90

Insufficient memory to load system files DOS报错信息91

Insufficient memory to read all system info DOS报错信息91

Insufficient memory to read entire directory DOS报错信息91

Insufficient memory to store macro.Use the DOSKEY command with the/BUFSIZE switch to increase available memory DOS报错信息92

Insufficient number of filespecs DOS报错信息92

Insufficient room in root directory Move files from directory and repeat CHKDSK DOS报错信息93

Insufficient space for the MIRROR image(or control)file DOS报错信息93

Insufficient space in version table for new entry DOS报错信息94

Integer divided by 0 DOS报错信息94

Intermediate file error during pipe DOS报错信息94

Internal error DOS报错信息95

Internal stack overflow system halted DOS报错信息95

Invalid access code DOS报错信息95

Invalid baud rate specified DOS报错信息96

Invalid boot record signature DOS报错信息96

Invalid characters in volume lable DOS报错信息96

Invalid code page DOS报错信息97

Invalid code page specified DOS报错信息97

Invalid combination of parameters DOS报错信息97

Invalid COMMAND.COM DOS报错信息98

Invalid country code or code page DOS报错信息98

Invalid current directory DOS报错信息98

Invalid date DOS报错信息99

Invalid device DOS报错信息99

Invalid device parameters from device driver DOS报错信息99

Invalid device request DOS报错信息100

Invalid device request parameters DOS报错信息100

Invalid directory DOS报错信息100

Invalid disk change reading (or writing)drive x: DOS报错信息100

Invalid drive and/or path DOS报错信息101

Invalid drive in search path DOS报错信息101

Invalid drive or file name DOS报错信息101

Invalid drive specification DOS报错信息102

Invalid drive specification.Source and target drive are the same DOS报错信息102

Invalid driver speeifier DOS报错信息102

Invalid entry,please enter x DOS报错信息103

Invalid environment size specified DOS报错信息103

Invalid existing format DOS报错信息103

Invalid filename DOS报错信息103

Invalid filename character.A filename with that first character already exist.Press any kev and then re-type the first character DOS报错信息104

Invalid format DOS报错信息104

Invalid function DOS报错信息104

Invalid handle DOS报错信息105

Invalid keyboard code specified DOS报错信息105

Invalid keyboard ID specified DOS报错信息105

Invalid macro definition DOS报错信息106

Invalid media or Track-0 bad-disk unusable DOS报错信息106

Invalid media type DOS报错信息106

Invalid memory block address DOS报错信息106

Invalid number of file/directory entries DOS报错信息107

Invalid number of parameters DOS报错信息107

Invalid option(s) DOS报错信息107

Invalid or unspecified drive DOS报错信息108

Invalid parameter DOS报错信息108

Invalid parameter combination DOS报错信息108

Invalid parameter specifications DOS报错信息108

Invalid parameter(s)specified. DOS报错信息109

Invalid partition table DOS报错信息109

Invalid path DOS报错信息110

Invalid path,not directory,or directory not empty DOS报错信息110

Invalid profile statement on line x DOS报错信息110

Invalid STACK parameters DOS报错信息111

Invalid sub-directory entry DOS报错信息111

Invalid switch-x DOS报错信息112

Invalid Syntax on DISPLAY.SYS code page driver DOS报错信息112

Invalid Syntax on PRINTER.SYS code page driver DOS报错信息112

Invalid time DOS报错信息112

Invalid unit DOS报错信息113

Invalid version number,format must be 2.11-9.99 DOS报错信息113

Invalid Volume ID DOS报错信息113

Is cross linked on allocation unit x: DOS报错信息114

KEYB has not been installed DOS报错信息115

Keyboard ID specified is inconsistent with the selected keyboard layout DOS报错信息115

Label not found DOS报错信息116

Last backup diskette not inserted DOS报错信息116

LAST File not backed up DOS报错信息116

line too long DOS报错信息116

List output is not assigned to a device DOS报错信息117

Lock violation DOS报错信息117

Logical Page out of range DOS报错信息117

LPTx:not rerouted DOS报错信息118

MATH-floating-point error:x DOS报错信息119

Media type not found DOS报错信息119

Memory allocation error.Cannot load DOS,system halted DOS报错信息120

Memory Control blocks destroyed DOS报错信息120

Missing operating system DOS报错信息120

Missing or invalid EMS parameter DOS报错信息120

Missing parameter DOS报错信息121

MS-DOS Task Swapper This program is used internally by the MS-DOS Shell and should not be run from the command line DOS报错信息121

Multiple drive letters specified DOS报错信息121

Must enter both/T and/N parameters DOS报错信息122

Must specify COM1,COM2,COM3 or COM4 DOS报错信息122

Must Specify destination line number DOS报错信息122

Must specify ON or OFF DOS报错信息122

Need DOS Version 2.x or higher DOS报错信息124

Net 042:unable to do requested command DOS报错信息124

NLSFUNC.EXE not installed DOS报错信息124

No Code page has been selected DOS报错信息124

No drive specified DOS报错信息124

NO EGA hardware detected DOS报错信息125

NO entries found in version table DOS报错信息125

NO entries found DOS报错信息126

NO Extended DOS Partition to delete DOS报错信息126

No files added DOS报错信息126

No files found filename DOS报错信息126

No files or directory found for the root. DOS报错信息127

No files Replaced DOS报错信息127

No fixed disk present DOS报错信息127

No free files handles.Cannot start COMMAND.COM,existing DOS报错信息128

No free handles DOS报错信息128

No handles left,increase FILES=value in CONFIG.SYS. DOS报错信息128

No hard drives found DOS报错信息128

No Logical drive(s)to delete DOS报错信息129

No more files DOS报错信息129

None of the clusters for this file are available.the file cannot be recovered.Press any key to continue. DOS报错信息129

No Non-DOS Partition to delete DOS报错信息129

Non-standard,missing or bad partition table. DOS报错信息130

Non-System disk or disk error Replace and press and key when ready DOS报错信息130

No partition to delete DOS报错信息131

No partition to make active. DOS报错信息131

No partitions to save DOS报错信息131

No Path DOS报错信息131

No Primary DOS partition to delete. DOS报错信息132

No response(not ready condition)press A to abort or R to Retry DOS报错信息132

No room for system on destination disk DOS报错信息132

No room in directory for file DOS报错信息133

No space to create a DOS partition DOS报错信息133

No Sub-directories exist DOS报错信息133

No such file or directory DOS报错信息133

No system on default drive DOS报错信息134

Not able to backup(or restore)file DOS报错信息134

Not a block device DOS报错信息134

No target drive specified DOS报错信息135

Not enough memory DOS报错信息135

Not enough room to merge the entire file.Continue(Y/N)? DOS报错信息135

Not enough space for environment DOS报错信息136

NOTE:SETVER device not loaded.To activate SETVER version reporting you must load the SETVER.EXE device in your CONFIG.SYS DOS报错信息136

Not found DOS报错信息137

Not ready DOS报错信息137

Not ready,Press any key to continue... DOS报错信息137

Not resetting hidden file filename DOS报错信息137

Not resetting system file filename DOS报错信息138

Null pointer assignment DOS报错信息138

Number passed to FUNC is invalid DOS报错信息138

One or more CON code page invalid for given keyboard code DOS报错信息139

Only Some of the clusters for this file are available.Do you want to recover this file with only the available clusters?(Y/N) DOS报错信息139

Out of disk space while writing output file:x DOS报错信息139

Out of environment space DOS报错信息140

Out of input DOS报错信息140

Out of Memory DOS报错信息140

Packed filc is corrupt DOS报错信息142

Parameter error DOS报错信息142

Parameter format not correct DOS报错信息143

Parameters not compatible with fixed disk DOS报错信息143

Parameters not compatible. DOS报错信息144

Parameters not supported. DOS报错信息144

Parameters not supported by drive DOS报错信息144

Parameter value not allowed DOS报错信息144

Parameter value not in allowed range DOS报错信息145

Paritv error or nonexistent memory error detected DOS报错信息145

Parse Error xx DOS报错信息145

Partition selected(x)is not startable,active partition not changed DOS报错信息146

Pathname too long DOS报错信息146

Path not found DOS报错信息146

Path too long DOS报错信息146

Permission denied DOS报错信息147

Physical Page out of range DOS报错信息147

Primary DOS Partition already exists DOS报错信息147

Printbox ID not in GRAPHICS profile DOS报错信息148

Printer error DOS报错信息148

Printer out of paper DOS报错信息148

Printer out of paper error DOS报错信息148

PRINT queue is empty. DOS报错信息149

PRINT queue is full. DOS报错信息149

Print type-not in GRAPHICS profile DOS报错信息149

Probable non-DOS DISK.Continue(Y/N)? DOS报错信息149

Processing cannot continue DOS报错信息150

Profile statement out of sequence on line x DOS报错信息150

Program too big to fit in memory DOS报错信息151

RAMDrive Errors DOS报错信息152

Rate and delay must be specified together DOS报错信息153

Read error in:filename DOS报错信息154

Read fault. DOS报错信息154

Read fault error reading drive x DOS报错信息154

Requested logical drive size exceeds the maximum available space DOS报错信息154

Requested partition size exceeds the maximum available space DOS报错信息155

Required font not loaded DOS报错信息155

Required parameter missing DOS报错信息155

Required profile statement missing before line x DOS报错信息156

Resource deadlock would occur DOS报错信息156

Restore file sequence error DOS报错信息156

Resync failed.Files are too different DOS报错信息157

RMN:SFT LCK fields not O DOS报错信息157

RSC:SFT not in SFT List DOS报错信息157

Run-time error x DOS报错信息157

Same drive specified more than once DOS报错信息159

SECOND diskette bad or imcompatible DOS报错信息159

Sector not found DOS报错信息159

Sector size too large in file-filename DOS报错信息160

Seek error DOS报错信息160

Seek operation failed DOS报错信息160

Share:Internal error DOS报错信息160

Sharing violation DOS报错信息161

Simulation Only DOS报错信息161

SMARTDrive Errors DOS报错信息161

Source and target drives are the same DOS报错信息163

Source diskette bad or incompatible DOS报错信息163

Source does not contain backup files DOS报错信息164

Source path and target drive cannot be the same DOS报错信息164

Source path required DOS报错信息164

Specified COMMAND Search directory bad DOS报错信息165

Specified drive does not exist or is non-removable DOS报错信息165

Specified entry was not found in version table DOS报错信息166

Stack overflow DOS报错信息166

Starting cluster is unavailable.This file cannot be recovered with UNDElETE command.Press any key to continue DOS报错信息166

Syntax error DOS报错信息166

Syntax errors in GRAPHICS profile DOS报错信息167

System resource exhausted DOS报错信息167

Target cannot be used for backup DOS报错信息168

Target diskette bad or incompatible DOS报错信息168

Target diskette unusable DOS报错信息168

TARGET media has lower capacity than SOURCE,Continue anyway(Y/N)? DOS报错信息169

The boot sector for this drive is incompatible with the MIRROR command DOS报错信息169

The current directory structure will be destroyed.All files will be placed in the root directory.Are you sure(Y/N)? DOS报错信息169

The entire drive will be reconstructed,directory structures will be destroyed.Are you sure(Y/N)? DOS报错信息170

The filename already exists.Type a different filename DOS报错信息170

The last file was not restored DOS报错信息170

The MIRROR command cannot operate on a network drive DOS报错信息171

The MIRROR image file found has inconsistent information.It cannot be used DOS报错信息171

The MIRROR process was unsuccessful DOS报错信息171

There are no entries available in the root directory of the drive.Delete one or more files from the root directory DOS报错信息172

There is no more space in version table for new entries DOS报错信息172

There is not enough disk space for system files DOS报错信息172

There is not enough room to create a restore file.you will not be.able to use the unformat utility.Proceed with Format(Y/N)? DOS报错信息172

The saved information is incompatible with fixed disk x.Restoration is not possible;drive x is skipped DOS报错信息173

This disk cannot be Quick Formatted.Proceed uith Unconditional Format(Y/N)? DOS报错信息173

This disk cannotbe unformatted.Proceed with Format(Y/N)? DOS报错信息173

This file cannot be automatically recovered because not all of the clusters are availalble DOS报错信息174

Too many arguments in command line DOS报错信息174

Too many block devices DOS报错信息175

Too many characters in volume label DOS报错信息175

Too many code pages specified DOS报错信息176

Too many command-line arguments DOS报错信息176

Too many command line parameters DOS报错信息176

Too many drive entries DOS报错信息177

Too many extended partitions DOS报错信息177

Too many file/directory entries DOS报错信息177

Too many filenames DOS报错信息178

Too many open files DOS报错信息178

Too many parameters DOS报错信息179

Too many redirections DOS报错信息179

Too much of memory fragmentation;MEM/C cannot be done DOS报错信息179

Total pages exceeded DOS报错信息180

Unable to access Drive x DOS报错信息181

Unable to active EMM386 DOS报错信息181

Unable to create directory DOS报错信息181

Unable to create KEYB table in resident memory DOS报错信息182

Unable to de-activate EMM386 as UMBS are being provided and/or EMS is being used DOS报错信息182

Unable to disable Weitek Coprocessor support DOS报错信息183

Unable to enable Weitek Coprocessor support DOS报错信息183

Unable to find the MIRROR control file.If you want to search for the MIRROR image file through the entire hard drive,press Y,or press N to cancel the UNFORMAT command DOS报错信息183

Unable to perform refresh operation DOS报错信息184

Unable to place EMM386 in Auto Mode DOS报错信息184

Unable to read sector DOS报错信息185

Unable to reload with profile supplied DOS报错信息185

Unable to set base address DOS报错信息185

Unable to shift screen left(or right) DOS报错信息186

Unable to write BOOT DOS报错信息186

Unknown error DOS报错信息186

Unknown media type DOS报错信息187

Unrecognized command in CONFIG.SYS DOS报错信息187

Unrecoverable error in directory.Convent directory to file(Y/N)? DOS报错信息187

Unrecoverable read error on drive x side y,track z DOS报错信息188

Unrecoverable read(or write)error on drive x side y,track z DOS报错信息188

Version table is corrupt. DOS报错信息190

Volume label does not match. DOS报错信息190

Volume label is not supported uith/8 parameter. DOS报错信息191

WARNING.ALLDATA ON NON-REMOVABLE DISK DRIVE x:WILL BE LOST!Proceed with Format(Y/N)? DOS报错信息192

WARNING!Data in a deleted logical DOS Drive will be lost. DOS报错信息192

WARNING!Data in the deleted Extended DOS Partition will be lost. DOS报错信息192

WARNING!Data in the deleted Primary DOS Partition will be lost. DOS报错信息193

WARNING-directory full DOS报错信息193

WARNING!Diskette is out of sequence.Replace diskette or continue if OK DOS报错信息193

WARNING:EMM386 installed without a LIM 3.2 compatible Page Frame DOS报错信息194

WARNING:E000 page frame address not recommended. DOS报错信息194

WARNING!File filename is a read-only file.Replace the file(Y/N)? DOS报错信息194

WARNING!File filename was changed after it was backed up.Replace the file(Y/N)? DOS报错信息195

WARNING!Files in the target drive x:BACKUP directory will be erased DOS报错信息195

WARNING!Files in the target drive x:root directory will be erased DOS报错信息195

WARNING:Invalid parameter ignored: DOS报错信息196

WARNING!Logical drives past Z:exist and will be ignored DOS报错信息196

WARNING!No files were found to back up DOS报错信息196

WARNING!No files were found to restore DOS报错信息197

WARNING!No partitions are set active-disk 1 is not startable unless a partition is set active DOS报错信息197

Warning!!Replacing an old copy of the EGA Device Driver. DOS报错信息197

WARNING:Shadow RAM disable not supported on this system DOS报错信息198

WARNING:Shadow RAM is in use and can't be disabled. DOS报错信息198

WARNING:SMARTDrive will not check for incompatible disk partitions.Data corruption may result. DOS报错信息198

WARNING:The A20 Line was already enabled. DOS报错信息199

WARNING-The application you are adding to the MS-DOS version table may not have been verified by microsoft on this version of MS--DOS.Please contact your soft-ware vendor for information on whether this application will operate properly under this version of MS--DOS.If you execute this application by instructing MS--DOS to report a different MS--DOS version number,you may lose or corrupt data,or system instabili-ties.In that circumstance,Microsoft is not responsible for any loss or damage DOS报错信息199

WARNING:The High Memory Area is unavailable. DOS报错信息199

Warning!The next step writes changes to disk. DOS报错信息200

WARNING!The partition set active is not startable. DOS报错信息200

WARNING:This disk cannot be unformatted if system files are transfered.Proceed with svstem transfer anyway(Y/N)? DOS报错信息200

WARNING:This version of HIMEM.SYS may cause conflicts with EMM386. DOS报错信息201

WARNING!Unrecognized DOS INT 25h/26h handler.Some other TSR programs may behave erratically while deletion-tracking software is resident!Try installing MIRROR program before your other resident programs. DOS报错信息201

WARNING:User specified ranges overlap. DOS报错信息202

WARNING!!WARNING!!This command should be used only to recovery from the in advertent use of the FORMAT command or the RECOVER command.Any other use of the UNFORMAT command may cause you to lose data! DOS报错信息202

WARNING:Weitek Coprocessor not installed DOS报错信息202

Weitek Coprocessor is inaccessible until EMM386 is re-activatted. DOS报错信息202

Weitek Coprocessor not installed. DOS报错信息203

Write error.no destination defined DOS报错信息203

Write failure,diskette unusable DOS报错信息203

Write fault DOS报错信息204

Write fault error writing drive x DOS报错信息204

Write protect error.Press any key to continue... DOS报错信息204

Write protect error writing drive x DOS报错信息204

Wrong DOS version. DOS报错信息205

XMS Driver not installed DOS 报错信息206

You attempted to write to a protected diskette. DOS报错信息207

You must have the file WINA20.386 in the root of your boot drive to run Windows in Enhanced Mode DOS报错信息207

Your target diskette is unformatted and NO FORMAT program was found.Do you have another diskette with FORMAT on it(Y/N)? DOS报错信息207

.(or..)Does not exist DOS报错信息209

.(or..)Entry has a bad attribute(or link)(or size) DOS报错信息209

/B invalid with a black and white printer DOS报错信息209

/DT was Specified.Because there is no delete-tracking file for this drive,the UNDELETE command cannot continue DOS报错信息210

中篇 DOS基本概念211

Alt key（Alt键） DOS概念211

Archive Attribute（归档属性） DOS概念211

Argument（变元） DOS概念212

ASCII（美国信息交换标准码） DOS概念212

Attribute（属性） DOS概念214

AUTOEXEC.BAT（自动执行批处理文件） DOS概念215

AUX（辅助设备） DOS概念219

Background Printing（后台打印） DOS概念220

Batch File（批处理文件） DOS概念220

Baud Rate（波特率） DOS概念222

Binary Numbers（二进制数） DOS概念223

BIOS（基本输入／输出系统） DOS概念224

Bit（位） DOS概念224

Booting Up（引导） DOS概念225

Buffer（缓冲区） DOS概念227

Bug（故障） DOS概念227

Byte（字节） DOS概念227

Cache（高速缓存） DOS概念229

Carriage Return（回车） DOS概念230

CGA（彩色图形适配器） DOS概念230

Cluster（簇） DOS概念231

Code Page（代码页） DOS概念231

Cold Boot（冷启动） DOS概念237

COM DOS概念238

Command Line（命令行） DOS概念238

Command Processor（命令处理程序） DOS概念238

CONFIG.SYS（系统配置文件） DOS概念239

Console（CON，控制台） DOS概念244

Conventional Memory（常规内存） DOS概念244

CPU（中央处理器） DOS概念245

Ctrl Key（Ctrl键） DOS概念245

Cursor（光标） DOS概念246

Customizing Systems for Foreign Language DOS概念247

Cut and Paste（剪贴） DOS概念258

Cylinder（柱面） DOS概念259

Data Bit（数据位） DOS概念260

Debugging（调试） DOS概念260

Decimal Number（十进制数） DOS概念261

Default（缺省） DOS概念261

Destination（目的） DOS概念262

Device（设备） DOS概念262

Device Driver（设备驱动程序） DOS概念265

Directory Name（目录名） DOS概念268

Directory Structure（目录结构） DOS概念269

Display Adapter（显示适配器） DOS概念270

DOS,A History of（DOS的历史） DOS概念271

Double-Click（双击） DOS概念273

Drag（牵引） DOS概念273

EGA（增强图形适配器） DOS概念274

EMS（扩展内存规范） DOS概念274

End of File Marker（文件结束标志） DOS概念274

Enter Key（回车键） DOS概念274

Environment,DOS（DOS环境） DOS概念275

ERRORLEVEL code（错误级代码） DOS概念276

Escape Sequence（转义序列） DOS概念277

Esc key（Esc键） DOS概念277

Expanded Memory（扩展内存） DOS概念277

Extended ASCII Code（扩充ASCII码） DOS概念278

Extended DOS partition（扩展DOS分区） DOS概念278

Extended Memory（扩充内存） DOS概念279

Extension（扩展名） DOS概念279

External Command（外部命令） DOS概念280

Field（域） DOS概念283

File Allocation Table（文件分配表） DOS概念283

File Attribute（文件属性） DOS概念284

File Control Block（文件控制块） DOS概念284

File Locking（文件锁定） DOS概念285

File Name（文件名） DOS概念285

File Recovery（文件恢复） DOS概念286

Filespec（文件说明） DOS概念290

Files,Types of（文件类型） DOS概念291

Filter（过滤器） DOS概念292

Foreground（前台） DOS概念292

Formatting（格式化） DOS概念292

Fragmentation（存储碎片） DOS概念293

Full-Screen Editor（全屏幕编辑） DOS概念295

Function Key（功能键） DOS概念295

Graphical User Interface（图形用户界面） DOS概念297

Hardware（硬件） DOS概念303

Hardware Interrupt（硬件中断） DOS概念304

Hexadecimal Number（十六进制数） DOS概念304

Hidden Attribute（隐含属性） DOS概念304

Hierarchy（层次性） DOS概念305

High-Level Format（高级格式化） DOS概念305

Highlight（高亮显示） DOS概念305

High Memory Area（HMA，高内存区） DOS概念306

IBM PC（IBM PC机） DOS概念307

Icon（图符） DOS概念307

Increnental Backup（增量备份） DOS概念307

Insert Mode（插入模式） DOS概念307

Installing DOS 5 or DOS 6（安装DOS 5或DOS 6） DOS概念308

Interface（界面） DOS概念308

Internal Command（内部命令） DOS概念308

Interrupt（中断） DOS概念308

Kilobyte（千字节） DOS概念310

LIM EMS 4.0（LIM扩展内存规范4.0） DOS概念311

Line Editor（行编辑器） DOS概念311

Linefeed（换行） DOS概念311

Locked File（锁定文件） DOS概念311

Logical Drive（逻辑驱动器） DOS概念311

Lost Chain（丢失链） DOS概念312

Low-Level Format（低级格式化） DOS概念312

Macro（宏） DOS概念313

MDA（单色显示适配器） DOS概念313

Megabyte（兆字节） DOS概念313

Memory（内存） DS概念314

Memory Management（内存管理） DOS概念314

Memory Resident（内存驻留的） DOS概念319

Metasymbol（元符号） DOS概念319

Microprocessor（微处理器） DOS概念320

Monochrome（单色） DS概念320

Mouse Operation（鼠标操作）DOS概念320

Mouse Term（鼠标术语） DOS概念320

Network（网络） DOS概念321

Overlay File（覆盖文件） DOS概念322

Overstrike Mode（改写模式） DOS概念322

Parallel Port（并行口） DOS概念323

Parameter（参数） DOS概念323

Parent Directory（父目录） DOS概念324

Parity（奇偶校验） DOS概念324

Partition Table（分区表） DOS概念324

Path Name（路径名） DOS概念325

Patusing the Display（暂停显示） DOS概念326

Pipe（管道） DOS概念326

Pixel（像素） DOS概念328

Port（端口） DOS概念328

Primary DOS partition（主DOS分区） DOS概念328

Primary Shell（主外壳） DOS概念329

Printer Driver（打印机驱动程序） DOS概念329

Print Graphics Displays（打印图形显示） DOS概念329

Printing the Screen（打印屏幕） DOS概念329

Print Spooler（打印假脱机程序） DOS概念329

PRN DOS概念329

Program File（程序文件） DOS概念330

Prompt,The DOS（DOS提示符） DOS概念330

Pull-Down Menu（下拉式菜单） DOS概念330

Queue（队列） DOS概念332

RAM Disk（RAM盘） DOS概念333

Random Access Memory（RAM，随机存取存储器） DOS概念336

Read-Only Attribute（只读属性） DOS概念336

Read-Only Memory（ROM，只读存储器） DOS概念338

Redirection（重定向） DOS概念338

Replaceable Parameter（可替换参数） DOS概念343

Reserved Memory（保留内存） DOS概念343

Resolution（分辨率） DOS概念343

Root Directory（根目录） DOS概念343

Secondary Shell（辅助外壳） DOS概念345

Sector（扇区） DOS概念345

Serial port（串行口） DOS概念346

Software（软件） DOS概念346

Software Interrupt（软件中断） DOS概念347

Source（源） DOS概念347

Spooler（假脱机程序） DOS概念348

Stop Bit（停止位） DOS概念348

String（串） DOS概念348

Subdirectory（子目录） DOS概念349

Switch（切换参数） DOS概念349

System Attribute（系统属性） DOS概念350

System Date（系统日期） DOS概念350

System Disk（系统盘） DOS概念350

System File（系统文件） DOS概念350

Target（目标） DOS概念351

TEMP DOS概念351

Text File（文本文件） DOS概念352

Text Mode（文本方式） DOS概念352

Time Slice（时间片） DOS概念352

Track（磁道） DOS概念352

Tree Structure（Hierarchy）（树状结构） DOS概念353

TSR（终止并驻留程序） DOS概念353

Upper Memory Blocks（UMB，上端内存块） DOS概念355

VGA（图形视频阵列） DOS概念361

Video Adapter（视频适配器） DOS概念361

Virtual Drive（虚拟驱动器） DOS概念361

Volume Label（卷标） DOS概念362

Warm Boot（热启动） DOS概念363

Wildcard（通配符） DOS概念363

Write Protection（写保护） DOS概念365

Zoom Control（缩放控制） DOS概念366

286 DOS概念367

386 DOS概念367

486 DOS概念368

8086 DOS概念368

8088 DOS概念369

80286 DOS概念369

80386 DOS概念369

80486 DOS概念370

下篇 DOS命令详解371

ANSI.SYS DOS命令371

APPEND DOS命令376

ASSIGN DOS命令378

ATTRIB DOS命令380

BACKUP DOS命令382

BREAK DOS命令384

BUFFERS DOS命令385

CALL DOS命令387

CD(CHDIR) DOS命令388

CHCP DOS命令390

CHKDSK DOS命令391

CHKSTATE.SYS DOS命令393

CHOICE DOS命令393

CLS DOS命令395

COMMAND DOS命令396

COMP DOS命令398

COPY DOS命令400

COUNTRY DOS命令403

CTTY DOS命令405

DATE DOS命令406

DBLSPACE.SYS DOS命令407

DEBUG DOS命令415

DEFRAG DOS命令417

DEL(ERASE) DOS命令419

DELTREE DOS命令421

DELOLDOS DOS命令421

DEVICE DOS命令422

DEVICEHIGH DOS命令424

DIR DOS命令428

DISKCOMP DOS命令431

DISKCOPY DOS命令432

DISPLAYSYS DOS命令433

DOS DOS命令435

DOSKEY DOS命令436

DOSSHELL DOS命令451

DRIVER.SYS DOS命令454

DRIVPARM DOS命令457

ECHO DOS命令459

EDIT DOS命令460

EDLIN DOS命令472

EGA.SYS DOS命令477

EMM386.EXE DOS命令478

EXE2BIN DOS命令482

EXIT DOS命令483

EXPAND DOS命令483

FASTHELP DOS命令485

FASTOPEN DOS命令485

FC DOS命令486

FCBS DOS命令489

FDISK DOS命令490

FILES DOS命令492

FIND DOS命令493

FOR DOS命令495

FORMAT DOS命令498

GOTO DOS命令502

GRAFTABL DOS命令503

GRAPHICS DOS命令504

HELP DOS命令506

HIMEM.SYS DOS命令507

IBMBIO.COM DOS命令510

IBMDOS.COM DOS命令510

IF DOS命令510

INCLDE OS命令512

INSTALL DOS命令513

INTERLNK.EXE DOS命令514

INTERSVR DOS命令517

IO.SYS DOS命令519

JOIN DOS命令520

KEYB DOS命令521

LABEL DOS命令523

LASTDRIVE DOS命令524

LOADfIX DOS命令525

LOADHIGH(LH) DOS命令526

MD(MKDIR) DOS命令530

MEM DOS命令531

MEMMAKER DS命令536

MENUCOLOR DOS命令538

MENUDEFAULT DOS命令538

MENUITEM DOS命令539

MIRROR DOS命令540

MODE DOS命令544

MORE DOS命令550

MOVE DOS命令551

MSAV DOS命令552

MSBACKUP DOS命令554

MSCDEX DOS命令556

MSD DOS命令557

MSDOS.SYS DOS命令559

MSHERC DOS命令559

NLSFUNC DOS命令561

NUMLOCK DOS命令562

PATH DOS概念563

PAUSE DOS命令565

POWER.EXE DOS命令566

PRINT DOS命令566

PRINTER.SYS DOS命令568

PROMPT DOS命令569

QBASIC DOS命令573

RAMDRIVE.SYS DOS命令582

RD(RMDIR) DOS命令584

RECOVER DOS命令586

REM DOS命令588

REN(RENAME) DOS命令589

REPLACE DOS命令590

RESTORE DOS命令591

SET DOS命令594

SETUP DOS命令595

SETVER DOS命令598

SHARE DOS命令600

SHELL DOS命令601

SHIFT DOS命令602

SIZER.EXE DOS命令603

SMARTDRV.EXE DOS命令604

SMARTDRV.SYS DOS命令607

SORT DOS命令609

STACKS DOS命令610

SUBMENU DOS命令611

SUBST DOS命令612

SWITCHES DOS命令614

SYS DOS命令615

TIME DS命令617

TREE DOS命令618

TRUENAME DOS命令619

TYPE DOS命令620

UNDELETE DOS命令622

UNFORMAT DOS命令628

UNINSTAIL DS命令631

VER OS命令633

VERIFY DS命令633

VOL DOS命令634

VSAFE DOS命令636

XCOPY DOS命令637