《Table 4.Repassivation parameters for the as-received and50%cold rolled samples》
![《Table 4.Repassivation parameters for the as-received and50%cold rolled samples》](http://bookimg.mtoou.info/tubiao/gif/BJKY201806005_22000.gif)
本系列图表出处文件名:随高清版一同展现
《"Effect of cold rolling on the microstructural, magnetic, mechanical, and corrosion properties of AISI 316L austenitic stainless steel"》
Fig.7 shows the potentiodynamic polarization plots for the annealed and as-cold-rolled samples in the Na Cl(1mol/L)+H2SO4(0.5 mol/L)solution.To simplify this discussion,all electrochemical corrosion parameters obtained from the polarization plots and represented in Table 3 are divided into three categories:uniform corrosion(on the basis of Icorr,CI,CPR,and Rcorr parameters),passive-layer properties(on the basis of Eb-Epp and Ip/Ic parameters),and sensitivity to pitting corrosion(on the basis of Eb,pit-Erp and Irp parameters),as follows:
图表编号 | XD002871000 严禁用于非法目的 |
---|---|
绘制时间 | 2018.06.01 |
作者 | S.Tanhaei、Kh.Gheisari、S.R.Alavi Zaree |
绘制单位 | Department of Materials Science and Engineering, Faculty of Engineering, Shahid Chamran University of Ahvaz、Department of Materials Science and Engineering, Faculty of Engineering, Shahid Chamran University of Ahvaz、Steel Research Center, Faculty of Engin |
更多格式 | 高清、无水印(增值服务) |