《Table 5 The photoelectric properties of the filament packaged by the silane modified epoxy resin pr
![《Table 5 The photoelectric properties of the filament packaged by the silane modified epoxy resin pr](http://bookimg.mtoou.info/tubiao/gif/GFZK201805012_30400.gif)
本系列图表出处文件名:随高清版一同展现
《A Low Temperature Vulcanized Transparent Silane Modified Epoxy Resins for LED Filament Bulb Package》
The LED chip was A17G-CD.VF=3.05,WLD=456.22,LOP=23.97.The properties were measured at 10 m A.X and Y were x axis and y axis of Color coordinate respectively.CCT was colour temperature,Ra was rendering index,Φwas lighting effect and VF was forward volt
Considering the results and discussions on the performance of the cured silane modified epoxy resins above,the silane modified epoxy resins cured by PEA-230 with r=1(Table S1,in ESI)was chosen to be the package material for an LED filament bulb test.The new resin was packaged on11 pieces of the filament as shown in Fig.S3(in ESI)and the photoelectric properties are given in Table 5.The experiments demonstrated that the effective luminous efficacy of the LED filament bulb packaged with the new resin was quite high(The average effective luminous efficacy was 110.65)and the silane modified epoxy resins prepared are good candidates for LED filament bulb package.
图表编号 | XD0020169300 严禁用于非法目的 |
---|---|
绘制时间 | 2018.05.01 |
作者 | Xiong-Fa Yang、Jia Liu、Qiong Chen、Yan-Ping Shen、Hong-Zhi Liu、Guo-Qiao Lai |
绘制单位 | Key Laboratory of Organosilicon Chemistry and Material Technology of Ministry of Education, Hangzhou Normal University、School of Chemistry and Chemical Engineering, Shandong University、Key Laboratory of Organosilicon Chemistry and Material Technology of M |
更多格式 | 高清、无水印(增值服务) |