《Table 1 Mechanical properties of different silk samples》

《Table 1 Mechanical properties of different silk samples》   提示：宽带有限、当前游客访问压缩模式
本系列图表出处文件名：随高清版一同展现
《摄入石墨烯量子点的家蚕可直接吐出力学性能增强的蚕丝（英文）》


  1. 获取 高清版本忘记账户？点击这里登录
  1. 下载图表忘记账户？点击这里登录

The influence of GQDs on the crystalline structures of silks was studied by WAXS，the corresponding 2D-and1D-WAXS patterns are shown in Figs 3–5，respectively.It can be observed that both the 2D-and 1D-WAXS patterns do not show any obvious difference among all the silk samples，proving that the basic structures of silks are not destroyed by the intake of GQDs，which is consistent with the results from Raman spectra.The mean crystallite size ofβ-sheets in a direction（interchain），b direction（intersheet）and c direction（along fiber axis），which is directly related to the mechanical properties of silks[42]，was obtained by analyzing the main equatorial（200），（120） and meridian（002）reflections[43–46]，respectively，through Scherrer formula[47，48].The results shown in Table S4 demonstrate that theβ-sheet nanocrystal size of GQDs-silks is smaller than that of controlsilk in a，b and c direction.The variation of theβ-sheet nanocrystal size in all the three directions among the GQDs-silks has no conspicuous regularity.

图表编号XD0039960000    严禁用于非法目的
绘制时间2019.02.01
作者马琳、Maxwell Akologo Akurugu、Vivian Andoh、刘海燕、宋江超、武国华、李龙
绘制单位College of Biotechnology, Jiangsu University of Science and Technology、The Sericultural Research Institute, Chinese Academy of Agricultural Sciences、Laboratory of Risk Assessment for Sericultural Products and Edible Insects, Ministry of Agriculture、Colleg
更多格式高清、无水印（增值服务）

相关图表

  1. 《Table 1.Properties of different samples.》2019.01.01
  2. 《Table 1 Mechanical properties of GO/CM composites with different vulcanization systems》2019.01.15
  3. 《Table 2.Mechanical properties of the AF and SC samples》2019.01.01
  4. 《表2 不同热输入的力学性能Table 2 Mechanical properties of different heat input》2018.01.25
  5. 《Table 1 Mechanical properties of NR vulcanizates filled with different amount of BMI and Si 69》2018.11.15
  6. 《Table 1 Mechanical properties and ceramic properties of ceramifying silicone rubber with different mass ratio of Al2O3/B》2018.11.15
  7. 《Table 4 Mechanical properties of samples before and after chain-extending reaction》2018.09.15
  8. 《Table 2 Mechanical properties of BIIR/CB/OMMT composites with different amounts of OMMT》2018.07.15
  9. 《Table 1 Mechanical properties of NBR and NBRCNs filled with different modified MMT》2018.07.15
  10. 《Table 1 Mechanical properties of BIIR/PP thermoplastic vulcanizates with different BMI amounts》2018.07.15
  11. 《Table 4 Mechanical properties of samples》2018.05.15
  12. 《表3 不同终轧温度下的力学性能Table 3 Mechanical properties of samples obtained from hot rolling with different finishing temperature》2018.06.01
  13. 《表6 PU和PU水凝胶的力学性能Table 6 Mechanical properties of PU samples and PU hydrogels》2018.08.01
  14. 《Table 3 Mechanical properties of different samples obtained from bending tests》2018.05.01
  15. 《Tab.2 Mechanical properties of different samples》2018.06.01
  16. 《表2 烧结件化学成分与力学性能Table 2 Chemical composition and mechanical properties of sintered samples》2018.06.27
  17. 《表3 工艺优化后试样力学性能检测结果Table 3 Mechanical property test result of sample after optimization of technical procedure》2018.01.25
  18. 《Table 3 Textural and compositional properties of different samples》2018.06.30
  19. 《Table 4 Mechanical properties of AZ31 magnesium alloy under different DCT conditions》2018.10.01
  20. 《表2 ECAP前后试样的力学性能Table 2 Mechanical properties of different CP-Al samples》2018.02.01

随机翻阅

《表4 2015年～2018年南充市卫生资源配置的全要素生产率及其分解》 《表2 天津市产业结构优化影响因素回归结果》 《表2 配送中心以及客户点的数量》 《表2 水土流失敏感因子评价指标》 《表4 多因素Logistic回归结果》 《表3“5G+保险”应用场景解析》 《表4 恢复期AOB和NOB的活性恢复速率》 《表4 列当寄生深度（cm)》 《表3 剪切球阀及连续油管结构参数》 《表4 8种WRKY蛋白亚细胞定位分析》