《Tab.1 The main geometry parameters for blade》
![《Tab.1 The main geometry parameters for blade》](http://bookimg.mtoou.info/tubiao/gif/FENG201806001_07100.gif)
本系列图表出处文件名:随高清版一同展现
《基于RANS和DDES的跨音速透平叶栅的型面损失分析(英文)》
The cascade coordinates from the Christopher[5]are used in this paper to design the blade.Using the method of spline curve interpolation,the whole blade is added more points.Meanwhile,the leading edge and the trailing edge were locally added more points.Among them,there are 1239points on the pressure side,and the suction side has 1342points.Adding more points is to make the blade curve more smoothly,as shown in Figure 1,the main geometric parameters are shown in Table 1.
图表编号 | XD0017594300 严禁用于非法目的 |
---|---|
绘制时间 | 2018.12.26 |
作者 | 李会、苏欣荣、袁新 |
绘制单位 | Key Laboratory for Thermal Science and Power Engineering of Ministry of Education,Tsinghua University、Key Laboratory for Thermal Science and Power Engineering of Ministry of Education,Tsinghua University、Key Laboratory for Thermal Science and Power Engine |
更多格式 | 高清、无水印(增值服务) |