《Table 3 Drinking water standard specifications given by WHO (2011) and IQS (2009) along with the di

《Table 3 Drinking water standard specifications given by WHO (2011) and IQS (2009) along with the di   提示：宽带有限、当前游客访问压缩模式
本系列图表出处文件名：随高清版一同展现
《"Hydrochemical characterization of groundwater in Balad district, Salah Al-Din Governorate, Iraq"》


  1. 获取 高清版本忘记账户？点击这里登录
  1. 下载图表忘记账户？点击这里登录

In order to evaluate the suitability of groundwater in the studied area for drinking purpose，the analytical results were compared（Table 2）with the drinking water standards of World Health Organization（WHO，2011）and Iraq standards（IQS，2009）set by Central Organization for Standardization and Quality Control（COSQC）（Table 3） .The prescribed limit of pH for drinking purpose given by WHO and IQS is 6.5-8.5.All the samples in the study area have pH within prescribed limit indicating its suitability for drinking purpose.The prescribed limit of TDS for drinking water set by WHO and IQS is 1 000 mg/L.All the groundwater samples in the study area exceeded the prescribed limit except one sample（Table 3）.

图表编号XD0016470600    严禁用于非法目的
绘制时间2018.12.01
作者Alhassan H Ismail、Muntasir A Shareef、Wesam Mahmood
绘制单位Middle Technical University, Institute of Technology-Baghdad, Water Resources Techniques Department、Middle Technical University, Institute of Technology-Baghdad, Water Resources Techniques Department、Middle Technical University, Institute of Technology-Ba
更多格式高清、无水印（增值服务）

相关图表

  1. 《表4 专家打分结果Table 4 Scores given by the experts》2018.06.25
  2. 《表9 地热供暖、供热、医疗、洗浴等耗水 (热) 量参考标准Table 9 Reference standards for water (heat) consumption by geothermal heating, heating, me》2018.06.01
  3. 《Table 3 Uncertainty in the Preparation Process of Standard Solution Series Caused by Temperature Change》2019.09.10
  4. 《Table 2 Standard Uncertainty Caused by Glass Gauge during the Preparation of Standard Solution》2019.09.10
  5. 《Table 2 Parameters of specific peptides and internal standard substances》2019.04.01
  6. 《Table 2 Assessment standard of development stage and warning states of regional water resources system》2019.01.30
  7. 《Table 2–Maximum allowable contamination concentration based on WHO's latest standard version (2011) and handbook on imp》2019.07.15
  8. 《Table 2 Specific growth rate of M.aeruginosa inhibited by different concentrations of water extract from R.japonica》2019.02.01
  9. 《表2 用不同流变模型拟合的标准误差Table 2Standard error fitted by various rheological models》2018.08.25
  10. 《表3 特定相对比容处的比动能Table 3 Specific kinetic energy at given relative volumes k J·g-1》2018.07.25
  11. 《表4 饮用水中无机组分分析Table 4Inorganic analysis for drinking water》2018.10.15
  12. 《表4 饮用水中无机组分分析Table 4Inorganic analysis for drinking water》2018.10.15
  13. 《表5 饮用水中有机组分分析Table 5 Organic analysis for drinking water》2018.10.15
  14. 《表5 饮用水中有机组分分析Table 5 Organic analysis for drinking water》2018.10.15
  15. 《表4 标准溶液制备使用的量具引起的不确定度Table 4 Uncertainty caused by standard gauges prepared by standard solution》2018.06.30
  16. 《Table 3 Input data required by the selected hydrological and water quality models[22, 23, 37, 38, 53–55, 63–67]》2018.12.01
  17. 《Table 3 Tensile properties of the joint prepared by TC pin at a given welding speed of 120 mm/min with different rotatio》2018.03.01
  18. 《Table 2 Tensile properties of the joint prepared by SC pin at a given rotational speed of 1000 r/min with different weld》2018.03.01
  19. 《表3 外标法、Co内标法、内标归一化法校正结果Table 3 Revised results by external standard method, Co internal standard method and internal sta》2018.08.15
  20. 《表3 传统方法核算的灰水足迹与水污染程度值Table 3 Grey water footprint and water pollution level obtained by traditional method》2018.07.01

随机翻阅

《表1 Alloy52/152材料特性》 《表2 消费品中化学物质限量发生变化时的潜在社会影响》 《表A1微网内部设备具体参数》 《表3 杨梅各品种经济及效益》 《表1 失效状态危险等级定义》 《表2-2 2017年度A公司预计利润指标完成情况表》 《表3 两组血清IL-17、MMP-9比较 (±s)》 《表2 不同系统的平均传输速率》 《表3 4种典型运动的功率峰值》 《表1 2006-2016年广东GDP和就业结构情况表》